LTR-NET™ MOBILE SERVICE MANUAL ADDENDUM 984x Series (UHF) 988x Series (800 MHz) 989x Series (900 MHz) 13.6 VDC Part No.
98x3/98x6 SERIES LTR-NET™ MOBILE RADIO SERVICE MANUAL ADDENDUM UHF, 800 MHz, 900 MHz Part No. 242-98x3-6xx Copyright© 1999 by Transcrypt International Incorporated Transcrypt offers communication solutions in two core areas: land mobile radio products and systems, and information security. EFJohnson land mobile radios and systems provide wireless communication for a variety of markets including government, public safety, and commercial users.
TABLE OF CONTENTS TABLE OF CONTENTS 1 GENERAL INFORMATION 1.1 1.2 SCOPE OF MANUAL ïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïìðì DIFFERENCES BETWEEN LTR AND LTR-NET VERSIONSýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïìðì TRANSCEIVER IDENTIFICATIONïýïýïýïýïýïýïýïýïìðì PART NUMBER BREAKDOWN ïýïýïýïýïýïýïýïýïýïýïìðì MISCELLANEOUS ýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïìðë $FFHVVRULHV ïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýýìðë $YDLODEOHý/75ð1HWý0RGHOV ýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýýìðë .
TABLE OF CONTENTS TABLE OF CONTENTS (CONT’D) 3.7 2.13 TEST MODE. . . . . . . . . . . . . . . . . . . . . . . . . . .2-29 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29 Displaying Software Revision Number . . . . . . 2-29 2.14 ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . 2-29 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29 Reading Error Codes . . . . . . . . . . . . . . . . . . . . .2-30 3 PROGRAMMING 3.1 GENERAL. . . . . . . . . .
TABLE OF CONTENTS TABLE OF CONTENTS (CONT’D) 4.7 LIST OF TABLES OTHER LTR-NET FEATURESýïýïýïýïýïýïýïýïýïýïýïýïéðæ 8QLTXHý,'ý&RGHVïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýýéðæ (OHFWURQLFý6HULDOý1XPEHUýõ(61ô ýïýïýïýïýïýïýïýïýïýïýïýïýýéðå (61ýDQGý8QLTXHý,'ý5HTXHVWVïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýýéðå ,QWHUURJDWH ïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýïýýéðå .
GENERAL INFORMATION SECTION 1 GENERAL INFORMATION 1.1 SCOPE OF MANUAL 242 - 9 8 x x - x x x x Options C = Compander D = Data/Acc Cable E = Encryption/ Compander H = Horn/Acc Cable Band 1 = VHF* 4 = UHF 8 = 800 MHz 9 = 900 MHz This addendum updates current LTR® 9800series service manuals with information needed to service 9800-series LTR-Net™ transceivers. The LTR service manuals it updates are as follows: Type 984x Series UHF - Part No. 001-9840-202 988x/989x 800/900 MHz - Part No.
GENERAL INFORMATION 1.5 MISCELLANEOUS 1.5.3 KEY CAP KIT 1.5.1 ACCESSORIES .H\ý&DSý.LWñý3DUWý1RïýèåæðäåéíðííëñýZLOOýEHý LQFOXGHGýZLWKýHDFKýWUDQVFHLYHUïý7KLVýNLWýLQFOXGHVýëèý NH\FDSVýODEHOHGýIRUýWKHýIROORZLQJýIXQFWLRQVã 7DEOHýìðìýLVýDýSDUWLDOýOLVWLQJýRIýDFFHVVRULHVýWKDWýDUHý DYDLODEOHýIRUýäåííðVHULHVýWUDQVFHLYHUVïý5HIHUýWRýWKLVý WDEOHýLQýWKHýVHUYLFHýPDQXDOýIRUýRWKHUýDFFHVVRULHVýWKDWý DUHýDYDLODEOHï )&1$8; +251 3$*( 865#4 Table 1-1 98xx Accessories $FFHVVRU\ 3DUWý1Rï .H\ý&DSý.
OPERATION SECTION 2 OPERATION 0LFURSKRQH -DFN 6SHDNHU 2SWLRQý6ZLWFKHV 7UDQVPLWî%XV\ ,QGLFDWRU 2Qð2IIî9ROXPH õ3UHVVî5RWDWHô 6HOHFWý6ZLWFK õ3UHVVî5RWDWHô 'LVSOD\ Figure 2-1 Front Panel Controls and Indicators 2.1 FEATURES z z 2.1.
OPERATION z z z z V\VWHPîJURXSñýWXUQLQJýWKLVýVZLWFKýFORFNZLVHýLQFUHDVHVý WKHýVHOHFWHGýV\VWHPýRUýJURXSñýDQGýWXUQLQJýLWýFRXQWHUð FORFNZLVHýGHFUHDVHVýWKHýVHOHFWHGýV\VWHPýRUýJURXSïý7Rý VZLWFKýEHWZHHQýV\VWHPýDQGýJURXSýVHOHFWñýSUHVVýWKLVý VZLWFKïý5HIHUýWRý6HFWLRQýëïéïèýIRUýPRUHýLQIRUPDWLRQï 5RDPLQJýõDXWRPDWLFýORFDOLW\ýVHDUFKô 4XHXLQJýRIýWHOHSKRQHñýXQLTXHý,'ñýDQGýGLUHFWHGý JURXSýFDOOVýE\ýUDGLRýV\VWHP (LJKWýOHYHOVýRIýUHFHLYHýSULRULW\ýSURJUDPPDEOHýRQý HDFKýJURXS 7UDQVPLWýLQKLELW 7KLVýFRQWUROýDOVRýKDVýWZRýDOWHUQD
OPERATION ýðý,QGLFDWHVýWKDWýWKHýGLVSOD\HGýJURXSýLVýLQýWKHýVFDQý OLVWýõVHHý6HFWLRQýëïæïçôï 2.2.
OPERATION 2.4.4 SYSTEM/GROUP DISPLAY INFORMATION 1. The backlight turns on. 2. All segments of the alphanumeric display are enabled and the last seven digits of the transceiver part number (see Section 1.4) are displayed on the top line very briefly. For example, a 800 MHz, high tier, LTR-Net, 15-watt transceiver is indicated as “9883602”. The eighth display digit is reserved for future use and is always “0”. Up to 99 systems and up to 99 groups per system can be displayed.
OPERATION H[DPSOHñýDVVXPHýWKHýIROORZLQJýV\VWHPVýDQGýJURXSVýDUHý SURJUDPPHGãý 3UHVVLQJýWKHý6HOHFWýVZLWFKýWRJJOHVýEHWZHHQýWKHý V\VWHPýDQGýJURXSýVHOHFWýPRGHVïý:LWKýWKHýQXPHULFý GLVSOD\ýPRGHýõVHHýSUHFHGLQJýVHFWLRQôñýWKHýDFWLYHýPRGHý LVýLQGLFDWHGýE\ýDQýDUURZýLQýWKHýGLVSOD\ïý7KLVýDUURZý SRLQWVýWRý¦6[[§ýZKHQýWKHýV\VWHPýVHOHFWýPRGHýLVý HQDEOHGñýDQGýWRý¦*[[§ýZKHQýWKHýJURXSýVHOHFWýPRGHýLVý VHOHFWHGýõVHHýIROORZLQJýH[DPSOHôï 6\VWHPýìýðý*URXSýìýPDQXDOO\ýVHOHFWHG 6\VWHPýëýðý*URXSVýëýDQGýêýõ*USýëýODVWýVHOHFWHGô 6\VWHPý
OPERATION SURJUDPPHGýIRUý&DOOý*XDUGýVTXHOFKñýWKHýPRQLWRUý PRGHýGHVFULEHGýLQý6HFWLRQýëïììïìýPXVWýDOVRýEHý HQDEOHGï GHVFULEHGýLQý6HFWLRQVýëïåýDQGýëïìíýDQGýDOVRýWKHý/75ý $SSOLFDWLRQý1RWHñý3DUWý1RïýííäðíííìðíëíñýUHYïýåýRUý ODWHUï ëï 3UHVVýWKHý)&1ýVZLWFKýDQGýWKHQýZLWKLQýåýVHFRQGVý URWDWHýWKHý6HOHFWýVZLWFKýDVý\RXýZRXOGýDýQRUPDOý VTXHOFKýFRQWUROïý5RWDWHýLWýFRXQWHUFORFNZLVHýXQWLOý QRLVHýLVýKHDUGýDQGýWKHQýURWDWHýLWýFORFNZLVHýVOLJKWO\ý SDVWýZKHUHýWKHýQRLVHýMXVWýPXWHVïý7KHýVTXHOFKýDGMXVWý PRGHýLVýLQGLFDWHGýE\ý¦648(
OPERATION /75ð1HWýDQGý/75ýV\VWHPVýDUHýSURJUDPPHGýZLWKý WKHýKRPHýUHSHDWHUýQXPEHUñýDýFROOHFWLRQýRIýJURXSVñýDQGý WUDQVPLWýLQKLELWýEORFNýRIý,'ýFRGHVýõVHHý6HFWLRQýëïåïéôïý 7KHýKRPHýUHSHDWHUýQXPEHUýDQGýJURXSý,'ýFRGHýIRUPý WKHýDGGUHVVýIRUýJURXSýFDOOVïý,QýDGGLWLRQñýLWýLVýWKHý UHSHDWHUýWKDWýLVýPRQLWRUHGýIRUýLQFRPLQJýFDOOýLQIRUPDð WLRQýõWKHýVWDWXVýUHSHDWHUýVHUYHVýDVýDýEDFNXSýZLWKý/75ð 1HWýRSHUDWLRQôïý LQGLFDWRUýLVýQRWýOLJKWHGñýWKHýFKDQQHOýLVýQRWýEXV\ýDQGýWKHý PHVVDJHýFDQýEHýWUDQVPLWWHGï 8VLQJý0RQLWRUý0RGHýðý,IýVFDQ
OPERATION &RQYHQWLRQDOý*URXSý7\SHV z ,IýWKHýV\VWHPýFRXOGýQRWýEHýDFFHVVHGýEHFDXVHýRIýDQý RXWðRIðUDQJHýFRQGLWLRQýRUýVRPHýRWKHUýUHDVRQñýWKHý LQWHUFHSWýWRQHýVRXQGVýDQGý¦12ý$&&(6§ýLVýLQGLð FDWHGýRQýWKHýORZHUýOLQHýRIýWKHýGLVSOD\ïý7KHý377ý VZLWFKýPXVWýWKHQýEHýUHOHDVHGýDQGýSUHVVHGýDJDLQýWRý PDNHýDQRWKHUýDFFHVVýDWWHPSWïý'ULYHýFORVHUýWRýWKHý UDGLRýV\VWHPýRUýDZD\ýIURPýVKLHOGLQJýVWUXFWXUHVý DQGýWU\ýDJDLQïý z :KHQýUHVSRQGLQJñýEXV\ýRUýRXWðRIðUDQJHýFRQGLð WLRQVýPD\ýDOVRýRFFXUýDVýZKHQýSODFLQJýDýFDOOý EHFDXVHýWKHýV\VWH
OPERATION 2.5.2 CALL INDICATOR 2.4.
OPERATION (DFKýORFDOLW\ýõVLWHôýFKDQQHOýFDQýEHýLQGLYLGXDOO\ý SURJUDPPHGýIRUýFRPSDQGLQJïý7KHQýZKHQHYHUýDýFDOOýLVý UHFHLYHGýRUýWUDQVPLWWHGýRQýRQHýRIýWKRVHýFKDQQHOVñý FRPSDQGLQJýLVýDXWRPDWLFDOO\ýHQDEOHGïý&RPSDQGLQJýLVý QRWýVHOHFWDEOHýE\ýWKHýXVHUñýDQGýWKHýFRPSDQGLQJýVWDWXVý LVýQRWýLQGLFDWHGýLQýWKHýGLVSOD\ïý7KHýFRQWUROýOLQHýIRUýWKLVý IXQFWLRQýõ2XWSXWý$ýRUý%ôýPXVWýEHýSURJUDPPHGýIRUý ¦&RPSDQG§ýDQGýDFWLYHýKLJKýDVýGHVFULEHGýLQ 6HFWLRQýêïìêïý 2.5.
OPERATION RUýèíýPLQXWHVñýìñýëñýéñýåñýìíñýìëñýRUýìçýKRXUVýRUý)RUHYHUý FDQýWKHQýEHýSURJUDPPHGïý7KHýGHOD\ýFDQýEHýRYHUULGGHQý DWýDQ\ýWLPHýE\ýWXUQLQJýSRZHUýRIIýXVLQJýWKHýIURQWðSDQHOý SRZHUýVZLWFKýRUýWXUQLQJýWKHýLJQLWLRQýVZLWFKýEDFNýRQï 2.5.
OPERATION 2QHýXVHýRIýWKLVýIHDWXUHýLVýWRýSUHYHQWýDýUHSHDWHUý IURPýEHLQJýNHSWýEXV\ýIRUýDQýH[WHQGHGýSHULRGýE\ýDQý DFFLGHQWDOO\ýNH\HGýWUDQVPLWWHUïý,WýFDQýDOVRýSUHYHQWý SRVVLEOHýGDPDJHýWRýWKHýWUDQVPLWWHUýFDXVHGýE\ýWUDQVPLWð WLQJýIRUýDQýH[FHVVLYHO\ýORQJýSHULRGï 2.6 OPTION SWITCHES AND MENU MODE 2.6.
OPERATION èï 7KHýVHOHFWHGýFRQILJXUDWLRQVýIRUýWKHýYDULRXVýIXQFð WLRQVýDUHýVDYHGýZKHQýWKHýPHQXýPRGHýLVýH[LWHGýLQýRQHý RIýWKHýIROORZLQJýZD\Vã Function Status z 0HQXý0RGHý'LVSOD\ z ëï 7RýGLVSOD\ýWKHýYDULRXVýIXQFWLRQVýWKDWýDUHýFRQWUROODEOHý E\ýWKHýPHQXýPRGHýõWRSýOLQHýLQGLFDWLRQôñýURWDWHýWKHý 6HOHFWýVZLWFKïý7KHýFXUUHQWO\ýVHOHFWHGýVWDWXVýLVý GLVSOD\HGýIRUýHDFKýIXQFWLRQï êï 7RýFKDQJHýWKHýVHOHFWHGýVWDWXVñýSUHVVýWKHý6HOHFWý VZLWFKïý,QIRUPDWLRQýGLVSOD\HGýIRUýHDFKýPHQXý SDUDPHWHUýLVýVKRZQýLQý6HFWLRQýëïìëïèï z 3
OPERATION JURXSýVFDQQLQJýLVýDFWXDOO\ýRFFXUULQJñýDýVFUROOLQJý XQGHUOLQHýLVýGLVSOD\HGýRQýWKHýXSSHUýOLQHýõVHHýIROORZLQJý LOOXVWUDWLRQôïý 6\VWHPý6FDQý/LVW *URXSý6FDQýðý7KLVýIHDWXUHýGHWHFWVýFDOOVýRQýDOOýVHOHFWð DEOHýJURXSVýLQýWKHýVHOHFWHGýRUýVFDQQHGýV\VWHPVýWKDWýDUHý LQýWKHýJURXSýVFDQýOLVWïý,IýJURXSýVFDQQLQJýLVýQRWýXVHGñý FDOOVýDUHýGHWHFWHGýRQýRQO\ýWKHýFXUUHQWO\ýVHOHFWHGýJURXSý õRUýWKHýODVWýVHOHFWHGýJURXSýRIýVFDQQHGýV\VWHPVôýDQGý KLJKHUýSULRULW\ýJURXSVï *URXSý6FDQý/LVW 7KHýW\SHýRIýVFDQQLQJýFDQýEHýVHOHFWHGýE\
OPERATION 2.7.4 LTR MODE SCANNING switch. If this switch is not programmed, scan list programming is not available. The scan lists can be programmed even if scanning is not enabled. The displayed system is in the scan list and scanned normally when is displayed, and the displayed group is in the scan list and scanned normally when is displayed (see illustration on page 3-14). With LTR mode scanning, the home repeater of each LTR system in the scan list is scanned.
OPERATION 127(ãý6FDQQLQJýGRHVýQRWýUHVXPHýLIýLWýLVýGLVDEOHGñý VXFKýDVýE\ýWDNLQJýWKHýPLFURSKRQHýRIIðKRRNï QRWýRQýWKHýVHOHFWHGýV\VWHPîJURXSñýRQHýRIýWKHýIROORZLQJý PHWKRGVýFDQýEHýXVHGã &DOOý'HOD\ý7LPH z 6HOHFWýWKHýV\VWHPîJURXSýRIýWKHýFDOOýPDQXDOO\ýXVLQJý WKHý&+/ýRUý6HOHFWýVZLWFKï z %HIRUHýVFDQQLQJýUHVXPHVñýH[LWýWKHýVFDQýPRGHýE\ý SUHVVLQJýWKHý6&$1ýVZLWFKïý7KHýV\VWHPîJURXSýRIýWKHý FDOOýWKHQýEHFRPHVýWKHýVHOHFWHGýV\VWHPîJURXSýDQGýLWý LVýQRWýQHFHVVDU\ýWRýFKDQJHýLWýPDQXDOO\ï 7KHýUHFHLYHýGHOD\ýWLPHýFRQWUROVýWK
OPERATION 7KHýKLJKHVWýSULRULW\ýLVýSURJUDPPHGýE\ý¦ì§ýDQGý WKHýORZHVWýSULRULW\ýE\ý¦å§ïý,IýDýFDOOýLVýGHWHFWHGýRQýWKHý VHOHFWHGýJURXSýRUýRQýDQ\ýJURXSýRIýWKHýVHOHFWHGýV\VWHPý ZLWKýDýSULRULW\ýKLJKHUýWKDQýWKHýVHOHFWHGýJURXSñýLWýLVý UHFHLYHGïý6\VWHPýRUýJURXSýVFDQQLQJýGRýQRWýQHHGýWRýEHý HQDEOHGýIRUýWKLVýWRýRFFXUï RSHUDWLRQýDUHýZKHQýVRPHýRWKHUýV\VWHPýQRWý SURJUDPPHGýZLWKýWKHýSULRULW\ý,'ýLVýEHLQJýPRQLWRUHGý DQGýZKLOHýWUDQVPLWWLQJïý /LNHZLVHñýLIýDýFDOOýLVýEHLQJýUHFHLYHGýRQýDýJURXSý SURJUDPPHGýDVýLQWHUUXSWLEOHýDQGýDý
OPERATION 0RELOHð2ULJLQDWHGý6SHFLDOý&DOOVý 7RýPDNHýDQRWKHUýFDOOýDWWHPSWñýWKHý377ýVZLWFKý PXVWýEHýUHOHDVHGýDQGýWKHQýSUHVVHGýDJDLQïý$OWKRXJKýWKHý èðVHFRQGýWLPHUýGRHVýFRXQWýGRZQýZKLOHýWKHý377ýVZLWFKý LVýSUHVVHGñýLWýLVýQRWýSRVVLEOHýWRýFRPSOHWHýWKHýFDOOýE\ý KROGLQJýWKHý377ýVZLWFKýGRZQýXQWLOýWKHýLQWHUFHSWýWRQHý VWRSVýVRXQGLQJïý 7HOHSKRQHýõ7HOFRôýðý7KHVHýDUHýLQWHUFRQQHFWýFDOOVýWRýRUý IURPýDýPRELOHýPDGHýWKURXJKýWKHý3XEOLFý6ZLWFKHGý7HOHð SKRQHý1HWZRUNýõ3671ôï $X[LOLDU\ýðý7KHVHýFDOOVýDOORZýDýPRELOHýWRýFRPPXQLFDWHý
OPERATION XQVXFFHVVIXOýDFFHVVHVýDUHýLQGLFDWHGýDVýGHVFULEHGýLQý 6HFWLRQýëïéïìíïý JURXSýSURJUDPPHGýIRUýWKHýFDOOýGHSHQGLQJýRQýVFDQý UHYHUWýSURJUDPPLQJýõVHHý6HFWLRQýëïæïåôï êï ,IýDýWHOHSKRQHýFDOOýLVýEHLQJýSODFHGñýGLDOýWKHýWHOHSKRQHý QXPEHUýRIýWKHýODQGVLGHýSDUW\ý\RXýDUHýFDOOLQJï 7RýUHFHLYHýDý'LUHFWHGý*URXSýFDOOýDQGýUHVSRQGñýDý VHOHFWHGñýSULRULW\ñýRUýVFDQQHGýJURXSýPXVWýEHýSURð JUDPPHGýIRUýWKHýJURXSý,'ýVSHFLILHGýE\ýWKHýRULJLQDWLQJý PRELOHïý7KLVýLVýEHFDXVHýWKHýFDOOýLVýFRQYHUWHGýWRýDýVWDQð GDUGýJURXSýFDOOýE\ýWKH
OPERATION $IWHUýWKHVHýGLJLWVýDUHýGLDOHGñýDýEHHSýLVýKHDUGý ZKLFKýLQGLFDWHVýWKDWýWKHýQXPEHUýZDVýDFFHSWHGýE\ýWKHý V\VWHPïý5LQJLQJýWKHQýLQGLFDWHVýWKDWýWKHýPRELOHýLVýEHLQJý UXQJýXQOHVVýLWýLVýDý'LUHFWHGý*URXSýFDOOïý:LWKýWKRVHý FDOOVñýQRýULQJLQJýRIýWKHýPRELOHýRFFXUVýDQGýDQRWKHUýEHHSý LVýKHDUGýZKLFKýLQGLFDWHVýWKHýSDWKýLVýFRPSOHWHýDQGý VSHDNLQJýVKRXOGýEHJLQïý 8QLTXHý,'ý&DOOýðý$ý¦ULQJLQJ§ýWRQHýLVýKHDUGýZKLFKý LQGLFDWHVýWKDWýWKHýPRELOHýLVýEHLQJýUXQJïý,IýWKHUHýLVýQRý DQVZHUñýULQJLQJýVWRSVýDIWHUýVHYHUDOýULQJVýRUýWKHýF
OPERATION l Roaming must be enabled by the ROAM option switch, ROAMING menu parameter, or programming (if the option switch and menu parameter are not available). l Scanning does not need to be enabled. However, if system scanning is enabled, an LTR-Net system must be selected. If an LTR or conventional system is selected, roaming is disabled.
OPERATION 2.9.5 TRANSCEIVER DISABLE set during alignment as described in the service manual (see Section 1.5.4). In addition, three squelch levels called Dropout, Capture, and Tight Capture Percentage are programmed for each locality (see Table 3-3). These levels automatically tighten the squelch setting in certain operating modes.
OPERATION NOTE: Since this feature does not increase system capacity, adding too many users may result in unsatisfactory operation due to frequent busy conditions. 2.10 LTR FEATURES Operation With Home Channel Aliasing LTR operation is described in Section 2.4.8. The two types of calls that can be placed with LTR operation are Group and Telephone. Standard Group calls and other common LTR and LTR-Net features are described in Section 2.8.
OPERATION have this capability). With most systems, a mobile user can be called directly (each has a unique telephone number). With others, the mobile being called must be specified as follows: 3. Briefly press the PTT switch to obtain a dial tone. A successful access and busy or no access conditions are indicated as described in Section 2.4.10. 4. When a dial tone is heard, enter the number to be called in one of the following ways: l l 1.
OPERATION problem, there is the option with this feature to allow transmitting if the correct receive Call Guard tone or code is detected. the monitor mode, take the microphone off-hook. The monitor mode is indicated by in the display. A conventional system must be selected to enable monitoring. If the microphone is taken off-hook with an LTR-Net/LTR system selected, scanning halts but monitoring is not selected. 2.11.
OPERATION 2.11.6 EXTERNAL ENCODERS AND DECODERS both the transmitting and receiving transceiver to be functional. When the channel is monitored before transmitting, Call Guard squelch may be temporarily disabled by the monitor mode described in Section 2.11.1. External encoders and decoders are not currently supported by the operating software. Tone Call Guard Squelch Tone-type Call Guard squelch utilizes subaudible CTCSS tones from 67-254.1 Hz.
OPERATION l Time-Out Timer - If this tone sounds after the transmitter has been keyed for an extended period and “TIMEOUT” is displayed, the transmitter has been disabled by the Time-Out Timer feature (see Section 2.5.14). This tone sounds in all operating modes. Call Proceed Tone - With LTR-Net Directed Group calls, ringing does not occur after the number is dialed. Instead, this short tone sounds after the confirmation tone to indicate that the audio path is complete and speaking can begin.
OPERATION 2.12.4 DISPLAY MESSAGES NO PHONE - Indicates that there is no telephone group programmed in the current system when the TEL option switch is pressed (Section 2.8.5). The following messages appear in the display to indicate various operating modes and error conditions. Selected system/group information appears in this display during normal operation (see Section 2.4.4).
OPERATION TX INHIB - Indicates that the transmitter has been disabled by the Transmit Inhibit feature (see Section 2.8.4). 2.13 TEST MODE 2.12.5 MENU MODE MESSAGES This transceiver currently does not have a test mode that can be selected to perform transceiver testing. To manually control the transceiver, program conventional channels. 2.13.1 GENERAL The following messages are displayed in the menu mode that is described in Section 2.6. Enabled or yes is indicated by “ON”, and disabled or no by “OFF”.
OPERATION To mark a code as read, press the Select switch. A beep then sounds and the next code is displayed if applicable. Once all stored codes are marked as read, they can no longer be displayed and “ * CODE xx” is not displayed at power up. However, they continue to be stored and can be read using the programmer (see next section). Connect the programming setup and then select File > Read Codes or click the icon in the toolbar (see Section 3.5).
PROGRAMMING SECTION 3 PROGRAMMING Remote Programming Interface (RPI) To Battery To Ign Sense To Antenna Figure 3-1 Programming Setup 7KHýSURJUDPPLQJýVRIWZDUHýUHTXLUHVýDý:LQGRZVý êëðELWýRSHUDWLQJýV\VWHPýVXFKýDVýäèîäåýRUý17ýéïíýWRý UXQïý7KHUHIRUHñýDýìçðELWýRSHUDWLQJýV\VWHPýVXFKýDVý :LQGRZVýêïìýFDQQRWýEHýXVHGïý 3.1 GENERAL 3.1.
PROGRAMMING WKHýYHKLFOHýRUýHYHQýVWRUHGýRQýDýVKHOIýLQGHILQLWHO\ýZLWKð RXWýDIIHFWLQJýSURJUDPPLQJïý GHVFULEHGýLQý6HFWLRQýêïìëñýDQGýLWýKDVýDýSKRQHýMDFNýIRUý LQMHFWLQJýWKHýWUDQVPLWýDXGLRýVLJQDOýGXULQJýDOLJQPHQWý õVHHý6HFWLRQýæýRIýVHUYLFHýPDQXDOôïý(DUOLHUý53,©VñýVXFKý DVý3DUWý1RïýíëêðèåìíðíííýRUýíëêðäæèíðíííñýFDQýEHý XVHGýWRýSHUIRUPýWKHýVWDQGDUGýSHUVRQDOLW\ýSURJUDPPLQJý GHVFULEHGýLQýPRVWýRIýWKLVýVHFWLRQï ,IýWKHýRSHUDWLQJýSURJUDPýQHHGVýWRýEHýXSGDWHGñý UHSURJUDPPLQJýLVýSHUIRUPHGýXVLQJýVSHFLDOý)ODVKý SURJUDPPLQJý
PROGRAMMING ëï ,QVHUWýWKHýGLVWULEXWLRQýGLVNýLQýWKHýGLVNýGULYHýRIý\RXUý FRPSXWHUï 3.3 MAIN WINDOW DESCRIPTION 3.3.
PROGRAMMING information. If this number reaches zero before all data is entered, fewer localities/systems/groups/banks must be programmed (see Section 2.4.9). - Delete a locality (Section 3.6.8). - Create a new system (Section 3.6.9). Reserved - This display is reserved for future use and any number it displays can be ignored. - Edit a current system (Section 3.6.9). - Copy a system (Section 3.6.9).
PROGRAMMING Title Bar Menu Bar Toolbar - Program Status/ Function Description Caps Lock Num Lock Special Modes EEPROM Flash Memory Memory Reserved Left Left Status Bar - Figure 3-2 Main Window Programming Main Radio Parameters The Main Radio Parameters are parameters that are the same regardless of which bank/system/group is selected. They are programmed as follows: Menu Parameters - Select the Menu Items screen by clicking the tab at the top.
PROGRAMMING VDYLQJýDQ\ýFKDQJHVïý5HSHDWýWKLVýSURFHGXUHýWRýDGGýDGGLð WLRQDOýV\VWHPVï PXVWýEHýSURJUDPPHGýWRýSURJUDPýDýEDQNïý3URFHHGýDVý IROORZVýWRýSURJUDPýORFDOLWLHVýõ6HFWLRQýêïçïåôã &UHDWHý1HZý/RFDOLW\ýðý6HOHFWý(GLWý!ý/RFDOLWLHVý!ý &UHDWHý1HZýRUýFOLFNý ýLQýWKHýWRROEDUïý Group Programming (DFKýJURXSýLVýOLQNHGýWRýRQHýRIýWKHýV\VWHPVïý 7KHUHIRUHñýDWýOHDVWýRQHýV\VWHPýPXVWýEHýFUHDWHGýDVýMXVWý GHVFULEHGýEHIRUHýJURXSVýFDQýEHýFUHDWHGïý*URXSVý SURJUDPýLQGLYLGXDOýFDOOýSDUDPHWHUVïý3URFHHGýDVý IROORZVýõ6HFWLRQýêïçïìíôã
PROGRAMMING Edit Bank - Select Edit > Banks > Edit Existing or click in the toolbar. Delete Bank - Select Edit > Banks > Delete or click in the toolbar. 2. When the bank programming screen is displayed, select the display number of the system to be added, edited, or deleted. Then select the system to be assigned to that number if applicable. Also program default scan list status of the system and other bank information such as alphatag and emergency and home system/group if applicable. File Menu 3.
PROGRAMMING 127(ãý7KHýVFUHHQVýGHVFULEHGýLQý6HFWLRQVýêïçïêýðýêïçïæý ZKLFKýIROORZýDUHýGLVSOD\HGýE\ýVHOHFWLQJý(GLWý!ý%DVLFý 0RELOHý3DUPVýDQGýWKHQýFOLFNLQJýWKHýWDEýDWýWKHýWRSï 3.6.3 BASIC PARAMETERS SCREEN Figure 3-3 Edit Menu 3.6 EDIT MENU 3.6.
PROGRAMMING 7UDQVPLWý7LPHð2XWýðý3URJUDPVýWKHýWLPHðRXWýWLPHUý õ6HFWLRQýëïèïìéôïý &RQYý3URFHHGðWRð7DONý7RQHýðý:KHQýVHOHFWHGñýWKHý SURFHHGðWRðWDONýWRQHýVRXQGVýRQýFRQYHQWLRQDOýV\VWHPVý DVýZHOOýDVýRQý/75î/75ð1HWýV\VWHPVýõ6HFWLRQýëïèïììôï 6HOHFWý.
PROGRAMMING WHUVýDUHýGHVFULEHGýLQý7DEOHýêðêïý7KHýIUHTXHQF\ýEDQGýLVý VHOHFWHGýRQýWKHýUDGLRýW\SHýVFUHHQýõVHHý6HFWLRQýêïçïëôï 6HFWLRQýëïçýIRUýPRUHýPHQXýPRGHýLQIRUPDWLRQñýDQGýWRý 7DEOHýêðìýIRUýEULHIýGHVFULSWLRQVýRIýLWHPVýSURJUDPPHGý LQýWKHý0HQXý,WHPVýVFUHHQï ý(GLWý!ý/RFDOLWLHVý!ý(GLWý([LVWLQJýðý(GLWVýDý FXUUHQWýORFDOLW\ïý7KHýORFDOLW\ýWRýEHýHGLWHGýLVýVHOHFWHGý IURPýDýOLVWïý7KHýVFUHHQýWKDWýLVýGLVSOD\HGýDQGýLWVýSDUDPð HWHUVýDUHýGHVFULEHGýLQý7DEOHýêðêïý 3.6.
PROGRAMMING Table 3-1 Menu and Option Switch Parameter Descriptions 3DUDPHWHU $GGî'HOHWH %DFNOLJKWý&RQWURO 0HQXý ,WHP 2SWLRQý 6ZLWFK 'HVFULSWLRQ ; 6FDQýOLVWýDGGîGHOHWHýVZLWFKýõ6HFWLRQýëïæïçôï ; &RQWUROVýWKHýGLVSOD\ýDQGýNH\SDGýEDFNOLJKWïý%ULJKWñý'LPñýDQGý2IIýPRGHVýFDQýEHý VHOHFWHGýõ6HFWLRQýëïéïêôï %DQNý6HOHFW ; ; 6HOHFWVýEDQNVýZKHQýWZRýRUýPRUHýDUHýSURJUDPPHGýõ6HFWLRQýëïèïìôï 'LVSOD\ý0RGHý6HO ; 6HOHFWVýWKHýDOSKDýRUýQXPHULFýGLVSOD\ýPRGHýõ6HFWLRQýëïéïéôï (PHUJHQF\ ; 6HOHFWVýWKHýHPHUJHQF\ýV\VWHPîJURXSýõ6HF
PROGRAMMING XVHGýWRýVHOHFWýWKHýVFUHHQýWKDWýVHWVýXSýDQGýHGLWVýEDQNVïý $VýGHVFULEHGýLQý¦%DQNý3URJUDPPLQJ§ýRQýSDJHýêðçñý EDQNVýDUHýFROOHFWLRQVýRIýV\VWHPVýWKDWýPD\ýEHýVHOHFWHGñý IRUýH[DPSOHñýIRUýRSHUDWLRQýLQýGLIIHUHQWýJHRJUDSKLFDOý DUHDVïý 3.7.
PROGRAMMING 352*ý(55ýðý,QGLFDWHVýWKDWýDQýHUURUýZDVýGHWHFWHGý ZKHQýYHULI\LQJýWKHýGDWDýSURJUDPPHGýLQWRýWKHýWUDQVð FHLYHUï 3.8 VIEW MENU WKHý53,ýõVHHý6HFWLRQýêïìïêôïý7KHýGHIDXOWýLVý&20ýìïý,Iý DQRWKHUýSRUWýLVýXVHGñýVHOHFWýLWýXVLQJýWKLVýIXQFWLRQïý7KHý QHZýSRUWýWKHQýEHFRPHVýWKHýGHIDXOWýSRUWñýVRýWKLVýIXQFð WLRQýRQO\ýQHHGVýWRýEHýXVHGýZKHQýWKHýSRUWýLVýFKDQJHGï 7KLVý9LHZýPHQXýLVýVKRZQýDERYHñýDQGýLWýLVýXVHGýWRý VHOHFWýWKHVHýIXQFWLRQVã 3.
PROGRAMMING 3.11.4 SPECIFYING RIC-EQUIPPED REPEATERS 3.11.
PROGRAMMING 3URJUDPPLQJýLVýSHUIRUPHGýXVLQJýVHSDUDWHý)ODVKý SURJUDPPLQJýVRIWZDUHýõVHHý7DEOHýìðìôïý7KLVýSURJUDPý LVýUXQýE\ýW\SLQJý3/$783'ýDWýWKHý'26ýSURPSWýõWKHý '26ýPRGHýPXVWýXVXDOO\ýEHýXVHGôïý7KHýSURJUDPý UHTXLUHVýDýVSHFLDOýGDWDýILOHýZKLFKýFRQWDLQVýWKHýXSGDWHGý UDGLRýVRIWZDUHýõVHHýQH[WýVHFWLRQôïý)ROORZýWKHýLQVWUXFð WLRQVýRQýWKHýVFUHHQýWRýSHUIRUPýWKHýDFWXDOýXSGDWLQJï &RQWDFWý\RXUý&XVWRPHUý6HUYLFHýRUý\RXUýVDOHVý UHSUHVHQWDWLYHýFRQFHUQLQJýWKHýDYDLODELOLW\ýRIýVRIWZDUHý XSGDWHVýIRUýWKLVýWUDQVFHLYHUïý7KH\ýPD\ýE
PROGRAMMING Table 3-3 Locality Programming Screen Description This screen is used to create a new locality or edit a current locality. It is displayed by selecting the Edit > Localities menu (see Section 3.6.8) or clicking one of the buttons in the toolbar. In general, a locality is a repeater site. Parameter Description Locality Name This is an eight-character name given to the locality to identify it during programming. It is not displayed by the transceiver.
PROGRAMMING Table 3-3 Locality Programming Screen Description (Continued) 3DUDPHWHU 'HVFULSWLRQ 3URJUDPVýHLWKHUýWKHýFKDQQHOýQXPEHUýRUýIUHTXHQF\ýRIýHDFKýUHSHDWHUýDWýWKHýORFDOLW\ñýGHSHQGLQJýRQýWKHý'LVSOD\ý 0RGHýWKDWýZDVýVHOHFWHGýE\ýWKHýSUHFHGLQJýSDUDPHWHUïý,IýHQWHULQJýFKDQQHOýQXPEHUVñýXVHýWKHý3URJUDPPLQJýFKDQQHOý QXPEHUVýIURPýWKHýWDEOHVýDWýWKHýHQGýRIýWKLVýVHFWLRQñýQRWýWKHý)&&ýFKDQQHOýQXPEHUïý&KDQQHOVýìðäëíýFDQýEHýSURð JUDPPHGýZLWKýåííý0+]ýPRGHOVñýDQGýFKDQQHOVýìðéæäýFDQýEHýSURJUDPPHGýZLWKýäííý0+]ýPRGHOVýõý6
PROGRAMMING Table 3-5 Group Programming Screen Description 7KLVýVFUHHQýLVýXVHGýWRýDGGýJURXSVýWRýDýV\VWHPýRUýHGLWýJURXSVýDOUHDG\ýDVVLJQHGýWRýDýV\VWHPïý,WýLVýGLVSOD\HGýE\ýVHOHFWLQJýWKHý (GLWý!ý*URXSVýPHQXýRUýFOLFNLQJýWKHý ýEXWWRQýLQýWKHýWRROEDUýõVHHý6HFWLRQýêïçïìíôïý,QýWKHýIROORZLQJýVFUHHQVñýILUVWýVHOHFWýIURPý WKHýGURSðGRZQýOLVWýRUýWKHýOLVWýDWýWKHýERWWRPñýWKHý*URXSý1RïýWRýEHýDGGHGýRUýHGLWHGïý7KHQýVHOHFWýWKHýGHVLUHGýSDUDPHWHUVýDQGýPDNHý WKHýFKDQJHVýE\ýFOLFNLQJýWKHý&KDQJHýEXWWRQýõWKLVýLVýDQý$GGýEXWWRQýLIýDGGLQ
PROGRAMMING Table 3-5 Group Programming Screen Description (Continued) Conventional Group Programming Screen 3DUDPHWHU 'HVFULSWLRQ 7KLVýGURSðGRZQýOLVWýVHOHFWVýWKHýJURXSýWRýEHýDGGHGýRUýHGLWHGýLQýWKHýVFUHHQïý *URXS 1XPEHU $OSKDý7DJ 7KLVýVSHFLILHVýWKHýHLJKWðFKDUDFWHUýDOSKDýWDJýWKDWýLVýGLVSOD\HGýZKHQýWKHýJURXSýLVýVHOHFWHGïý 7[ý2SWLRQ $OZD\Vý ý7[ýHQDEOHGñý7'2%ýõ7UDQVPLWý'LVDEOHý2Qý%XV\ôýGLVDEOHG 'LVDEOHý%XV\ý ý7[ýDQGý7'2%ýHQDEOHGñýQRýWUDQVPLWýZLWKýFDUULHUýHYHQýZLWKýYDOLGý&DOOý*XDUG 2Qý9DOLGý&*ý ý7[ýDQGý7'2%ý
PROGRAMMING Table 3-5 Group Programming Screen Description (Continued) 3DUDPHWHU 'HVFULSWLRQ 7DONð$URXQG 6HOHFWVýLIýWKHýWDONðDURXQGýPRGHýLVýVHOHFWHGýZKHQýWUDQVPLVVLRQVýDUHýPDGHýRQýWKHýJURXSýõ6HFWLRQýëïììïéôïý 6HQGý7XUQð 6HOHFWVýLIýWKHý&DOOý*XDUGýWXUQðRIIýFRGHýLVýVHQWýZKHQýWKHý377ýVZLWFKýLVýUHOHDVHGýõ6HFWLRQýëïììïèôï RII 'LVDEOHý0RQý ,IýVHOHFWHGñýGLVDEOHVýWKHýPLFURSKRQHýKDQJHUýPRQLWRUýIXQFWLRQýRQýWKHýJURXSïý7DNLQJýWKHýPLFURSKRQHýRIIðKRRNý 2IIð+RRN WKHQýGRHVýQRWýHQDEOHýWKHýPRQLWRUýPRGHýDOWKRXJKýVFDQQLQJýLV
PROGRAMMING Table 3-6 Bank Programming Screen Description (Continued) 3DUDPHWHU 'HVFULSWLRQ 6HOHFWVýWKHýKRPHýV\VWHPîJURXSýVHOHFWHGýE\ýWKHý+RPHýVHOHFWýVZLWFKýRUýIXQFWLRQýRQýWKHýEDQNýõ6HFWLRQýëïèïæôï +RPH 6\VWHPî*US 'RQHý%XWWRQ &OLFNýWKLVýEXWWRQýZKHQýILQLVKHGýHGLWLQJýWKHýEDQNýWRýVDYHýWKHýFKDQJHVï &OLFNýWKLVýEXWWRQýWRýH[LWýWKHýVFUHHQýZLWKRXWýVDYLQJýDQ\ýFKDQJHVýWRýWKHýEDQNï &DQFHO %XWWRQ &KDQJHî$GGý 7KLVýLVýDý&KDQJHýEXWWRQýZKHQýHGLWLQJýDýV\VWHPýDQGýDQý$GGýEXWWRQýZKHQýDGGLQJýDýV\VWHPïý,WýLVýFOLFNHGýWRýPDNHý W
PROGRAMMING WKDWýFXUUHQWO\ýDUHýVXSSRUWHGýE\ýVRIWZDUHýDUHýGHVFULEHGý LQýWKHýIROORZLQJýLQIRUPDWLRQï HQFU\SWLRQýLVýWRýEHýXVHGýLVýSURJUDPPHGýIRUýHQFU\SWLRQý DVýGHVFULEHGýLQý6HFWLRQýêïçïìíïý,QýDGGLWLRQñýWKHý,î2ýOLQHý ZKLFKýFRQWUROVýWKHýHQFU\SWLRQýPRGXOHýõ2XWSXWý$ýRUý%ôý PXVWýEHýSURJUDPPHGýIRUý¦(QFU\SW§ïý&RQVXOWýWKHý LQVWDOODWLRQýLQVWUXFWLRQVýLQFOXGHGýZLWKýWKHýHQFU\SWLRQý PRGXOHýDQGý6HFWLRQýëïèïèýIRUýPRUHýLQIRUPDWLRQï 3.13.
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT ì ë ê é è ç æ å ä ìí ìì ìë ìê ìé ìè ìç ìæ ìå ìä ëí ëì ëë ëê ëé ëè ëç ëæ ëå ëä êí êì êë êê êé êè êç êæ êå êä éí éì éë éê éé éè éç éæ éå éä èí èì èë ì ë ê é è ç æ å ä ìí ìì ìë ìê ìé ìè ìç ìæ ìå ìä ëí ëì ëë ëê ëé ëè ëç ëæ ëå ëä êí êì êë êê êé êè êç êæ êå êä éí éì éë éê éé éè éç éæ éå éä èí èì èë åèìïíìëè åèìïíêæè åèìïíçëè åèìïíåæè åèìïììëè åèìïìêæè åèìïìçëè åèìïìåæè åèìïëìëè åèìïëêæè åèìïëçëè åèìïëåæè åèìïêìë
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT ìíè ìíç ìíæ ìíå ìíä ììí ììì ììë ììê ììé ììè ììç ììæ ììå ììä ìëí ìëì ìëë ìëê ìëé ìëè ìëç ìëæ ìëå ìëä ìêí ìêì ìêë ìêê ìêé ìêè ìêç ìêæ ìêå ìêä ìéí ìéì ìéë ìéê ìéé ìéè ìéç ìéæ ìéå ìéä ìèí ìèì ìèë ìèê ìèé ìèè ìèç ìíè ìíç ìíæ ìíå ìíä ììí ììì ììë ììê ììé ììè ììç ììæ ììå ììä ìëí ìëì ìëë ìëê ìëé ìëè ìëç ìëæ ìëå ìëä ìêí ìêì ìêë ìêê ìêé ìêè ìêç ìêæ ìêå ìêä ìéí ìéì ìéë ìéê ìéé ìéè ìéç ìéæ ìéå ìéä ìèí ìèì ìèë ìèê ìèé ìèè
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT ëíä ëìí ëìì ëìë ëìê ëìé ëìè ëìç ëìæ ëìå ëìä ëëí ëëì ëëë ëëê ëëé ëëè ëëç ëëæ ëëå ëëä ëêí ëêì ëêë ëêê ëêé ëêè ëêç ëêæ ëêå ëêä ëéí ëéì ëéë ëéê ëéé ëéè ëéç ëéæ ëéå ëéä ëèí ëèì ëèë ëèê ëèé ëèè ëèç ëèæ ëèå ëèä ëçí ëíä ëìí ëìì ëìë ëìê ëìé ëìè ëìç ëìæ ëìå ëìä ëëí ëëì ëëë ëëê ëëé ëëè ëëç ëëæ ëëå ëëä ëêí ëêì ëêë ëêê ëêé ëêè ëêç ëêæ ëêå ëêä ëéí ëéì ëéë ëéê ëéé ëéè ëéç ëéæ ëéå ëéä ëèí ëèì ëèë ëèê ëèé ëèè ëèç ëèæ ëèå ëèä
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT êìê êìé êìè êìç êìæ êìå êìä êëí êëì êëë êëê êëé êëè êëç êëæ êëå êëä êêí êêì êêë êêê êêé êêè êêç êêæ êêå êêä êéí êéì êéë êéê êéé êéè êéç êéæ êéå êéä êèí êèì êèë êèê êèé êèè êèç êèæ êèå êèä êçí êçì êçë êçê êçé êìê êìé êìè êìç êìæ êìå êìä êëí êëì êëë êëê êëé êëè êëç êëæ êëå êëä êêí êêì êêë êêê êêé êêè êêç êêæ êêå êêä êéí êéì êéë êéê êéé êéè êéç êéæ êéå êéä êèí êèì êèë êèê êèé êèè êèç êèæ êèå êèä êçí êçì êçë êçê
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT éìæ éìå éìä éëí éëì éëë éëê éëé éëè éëç éëæ éëå éëä éêí éêì éêë éêê éêé éêè éêç éêæ éêå éêä ééí ééì ééë ééê ééé ééè ééç ééæ ééå ééä éèí éèì éèë éèê éèé éèè éèç éèæ éèå éèä éçí éçì éçë éçê éçé éçè éçç éçæ éçå éìæ éìå éìä éëí éëì éëë éëê éëé éëè éëç éëæ éëå éëä éêí éêì éêë éêê éêé éêè éêç éêæ éêå éêä ééí ééì ééë ééê ééé ééè ééç ééæ ééå ééä éèí éèì éèë éèê éèé éèè éèç éèæ éèå éèä éçí éçì éçë éçê éçé éçè éçç éçæ
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT èëì èëë èëê èëé èëè èëç èëæ èëå èëä èêí èêì èêë èêê èêé èêè èêç èêæ èêå èêä èéí èéì èéë èéê èéé èéè èéç èéæ èéå èéä èèí èèì èèë èèê èèé èèè èèç èèæ èèå èèä èçí èçì èçë èçê èçé èçè èçç èçæ èçå èçä èæí èæì èæë èëì èëë èëê èëé èëè èëç èëæ èëå èëä èêí èêì èêë èêê èêé èêè èêç èêæ èêå èêä èéí èéì èéë èéê èéé èéè èéç èéæ èéå èéä èèí èèì èèë èèê èèé èèè èèç èèæ èèå èèä èçí èçì èçë èçê èçé èçè èçç èçæ èçå èçä èæí èæì
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rïý>ì@ 1Rïý>ì@ )UHTï )UHT çëè çëç çëæ çëå çëä çêí çêì çêë çêê çêé çêè çêç çêæ çêå çêä çéí çéì çéë çéê çéé çéè çéç çéæ çéå çéä çèí çèì çèë çèê çèé çèè çèç çèæ çèå çèä ççí ççì ççë ççê ççé ççè ççç ççæ ççå ççä çæí çæì çæë çæê çæé çæè çæç çëê çëé çëè çëç çëæ çëå çëä çêí çêì çêë çêê çêé çêè çêç çêæ çêå ð çêä ð çéí çéì çéë çéê çéé çéè çéç çéæ çéå çéä çèí çèì çèë çèê çèé çèè çèç çèæ çèå çèä ççí ççì ççë ççê ççé ççè ççç ççæ ççå ççä çæí
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rïý>ì@ 1Rïý>ì@ )UHTï )UHT æëä æêí æêì æêë æêê æêé æêè æêç æêæ æêå æêä æéí æéì æéë æéê æéé æéè æéç æéæ æéå æéä æèí æèì æèë æèê æèé æèè æèç æèæ æèå æèä æçí æçì æçë æçê æçé æçè æçç æçæ æçå æçä ææí ææì ææë ææê ææé ææè ææç æææ ææå ææä æåí æëì æëë æëê æëé æëè æëç æëæ æëå æëä æêí æêì æêë æêê æêé æêè æêç æêæ æêå æêä æéí æéì æéë æéê æéé æéè æéç æéæ æéå æéä æèí æèì æèë ð æèê ð æèé æèè æèç æèæ æèå æèä æçí æçì æçë æçê æçé æçè æçç æçæ æçå
PROGRAMMING åííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rïý>ì@ 1Rïý>ì@ )UHTï )UHT åêê åêé åêè åêç åêæ åêå åêä åéí åéì åéë åéê åéé åéè åéç åéæ åéå åéä åèí åèì åèë åèê åèé åèè åèç åèæ åèå åèä åçí åçì åçë åçê åçé åçè åçç åçæ åçå åçä åæí åæì åæë åæê åæé åæè åæç åëê åëé åëè åëç åëæ åëå åëä åêí ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð ð åçåïäííí åçåïäìëè åçåïäëèí åçåïäêæè åçåïäèíí åçåïäçëè åçåïäæèí åçåïäåæè åçäïíííí åçäïíìëè åçäïíëèí åçäïíêæè åçäïíèíí åçäïíç
PROGRAMMING äííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT ýì ýë ýê ýé ýè ýç ýæ ýå ýä ýìí ýìì ýìë ýìê ýìé ýìè ýìç ýìæ ýìå ýìä ýëí ýëì ýëë ýëê ýëé ýëè ýëç ýëæ ýëå ýëä ýêí ýêì ýêë ýêê ýêé ýêè ýêç ýêæ ýêå ýêä ýéí ýéì ýéë ýéê ýéé ýéè ýéç ýéæ ýéå ýéä ýèí ýèì ìý ëý êý éý èý çý æý åý äý ìíý ììý ìëý ìêý ìéý ìèý ìçý ìæý ìåý ìäý ëíý ëìý ëëý ëêý ëéý ëèý ëçý ëæý ëåý ëäý êíý êìý êëý êêý êéý êèý êçý êæý êåý êäý éíý éìý éëý éêý ééý éèý éçý éæý éåý éäý èíý èìý April 1999 Part No.
PROGRAMMING äííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT ìíê ìíé ìíè ìíç ìíæ ìíå ìíä ììí ììì ììë ììê ììé ììè ììç ììæ ììå ììä ìëí ìëì ìëë ìëê ìëé ìëè ìëç ìëæ ìëå ìëä ìêí ìêì ìêë ìêê ìêé ìêè ìêç ìêæ ìêå ìêä ìéí ìéì ìéë ìéê ìéé ìéè ìéç ìéæ ìéå ìéä ìèí ìèì ìèë ìèê ìíê ìíé ìíè ìíç ìíæ ìíå ìíä ììí ììì ììë ììê ììé ììè ììç ììæ ììå ììä ìëí ìëì ìëë ìëê ìëé ìëè ìëç ìëæ ìëå ìëä ìêí ìêì ìêë ìêê ìêé ìêè ìêç ìêæ ìêå ìêä ìéí ìéì ìéë ìéê ìéé ìéè ìéç ìéæ ìéå ìéä ìèí ìèì ìèë ìèê äêç
PROGRAMMING äííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT ëíè ëíç ëíæ ëíå ëíä ëìí ëìì ëìë ëìê ëìé ëìè ëìç ëìæ ëìå ëìä ëëí ëëì ëëë ëëê ëëé ëëè ëëç ëëæ ëëå ëëä ëêí ëêì ëêë ëêê ëêé ëêè ëêç ëêæ ëêå ëêä ëéí ëéì ëéë ëéê ëéé ëéè ëéç ëéæ ëéå ëéä ëèí ëèì ëèë ëèê ëèé ëèè ëíè ëíç ëíæ ëíå ëíä ëìí ëìì ëìë ëìê ëìé ëìè ëìç ëìæ ëìå ëìä ëëí ëëì ëëë ëëê ëëé ëëè ëëç ëëæ ëëå ëëä ëêí ëêì ëêë ëêê ëêé ëêè ëêç ëêæ ëêå ëêä ëéí ëéì ëéë ëéê ëéé ëéè ëéç ëéæ ëéå ëéä ëèí ëèì ëèë ëèê ëèé ëèè Apr
PROGRAMMING äííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT êíæ êíå êíä êìí êìì êìë êìê êìé êìè êìç êìæ êìå êìä êëí êëì êëë êëê êëé êëè êëç êëæ êëå êëä êêí êêì êêë êêê êêé êêè êêç êêæ êêå êêä êéí êéì êéë êéê êéé êéè êéç êéæ êéå êéä êèí êèì êèë êèê êèé êèè êèç êèæ êíæ êíå êíä êìí êìì êìë êìê êìé êìè êìç êìæ êìå êìä êëí êëì êëë êëê êëé êëè êëç êëæ êëå êëä êêí êêì êêë êêê êêé êêè êêç êêæ êêå êêä êéí êéì êéë êéê êéé êéè êéç êéæ êéå êéä êèí êèì êèë êèê êèé êèè êèç êèæ äêå
PROGRAMMING äííý0+]ý&KDQQHOV 3URJý&KDQïý )&&ý&KDQïý 5HSHDWHUý7[ý 5HSHDWHUý5[ý 1Rï 1Rï )UHTï )UHT éíä éìí éìì éìë éìê éìé éìè éìç éìæ éìå ýéìä éëí éëì éëë éëê éëé éëè éëç éëæ éëå éëä éêí éêì éêë éêê éêé éêè éêç éêæ éêå éêä ééí ééì ééë ééê ééé éíä éìí éìì éìë éìê éìé éìè éìç éìæ éìå éìä éëí éëì éëë éëê éëé éëè éëç éëæ éëå éëä éêí éêì éêë éêê éêé éêè éêç éêæ éêå éêä ééí ééì ééë ééê ééé äéíïììëè äéíïìëèí äéíïìêæè äéíïìèíí äéíïìçëè äéíïìæèí äéíïìåæè äéíïëííí äéíïëìëè äéíïëëèí äéíïëêæè äéíïëèíí äéíïëçëè äéíïë
LTR-NET OVERVIEW SECTION 4 LTR-NET OVERVIEW Locality 1 Locality 2 Locality 3 Viking® VX Repeaters Viking® VX Repeaters Viking® VX Repeaters Data Bus Data Bus Subscriber Units Data Bus Subscriber Units Subscriber Units Voice and Data Link Voice and Data Link System and Subscriber Manager Voice and Data Link 3000-Series Switch 3000-Series Switch Public Switched Telephone Network (PSTN) Call Processor Call Processor Ethernet Link Ethernet Link Ethernet Link Figure 4-1 LTR-Net System Di
LTR-NET OVERVIEW • 6\VWHPý&RQWURO &XUUHQWý/75ýVXEVFULEHUýXQLWVýFDQýUHPDLQýLQýVHUYLFHý DQGý/75ð1HWýVXEVFULEHUýXQLWVýDGGHGýJUDGXDOO\ïý7KLVý PDNHVýXSJUDGLQJýWRý/75ð1HWýYHU\ýFRQYHQLHQWýDQGý OHVVýFRVWO\ï • :KHQýQHZýFKDQQHOVýDUHýDGGHGýWRýDýORFDOLW\ñý VXEVFULEHUýXQLWVýFDQýEHýXSGDWHGýZLWKýWKRVHýFKDQQHOVý RYHUýWKHýDLUïý7KLVýHOLPLQDWHVýWKHýQHHGýWRýEULQJýWKHPý EDFNýLQýIRUýUHSURJUDPPLQJïý • 2YHUðWKHðDLUýVXEVFULEHUýXQLWýSURJUDPPLQJýDOORZVý WKHý,'ýFRGHVýRIýXSýWRýìëåýV\VWHPVýDQGýìëåýJURXSVýWRý EHýFKDQJHGïý • 7KHý
LTR-NET OVERVIEW • 7\SLFDOýDFFHVVýWLPHýIRUýJURXSýFDOOVýLVýWKHýVDPHýDVý ZLWKý/75ýRSHUDWLRQïý$FFHVVýWLPHýIRUýXQLTXHý,'ýDQGý DX[LOLDU\ýFDOOVýLVýOHVVýWKDQýèííýPLOOLVHFRQGVï • 3ULRULW\ýDFFHVVñýDXWRPDWLFýHPHUJHQF\ýFDOOVñýVWDWXVý PHVVDJLQJñýDQGýV\VWHPýVHFXULW\ýNH\VýDUHýQRWý DYDLODEOHï 6WDWXVý5HSHDWHUýðý7KHýUHSHDWHUýDWýDýORFDOLW\ýGHVLJQDWHGý WRýSURYLGHýKRPHýFKDQQHOýEDFNXSïý,WýWUDQVPLWVýFDOOý LQIRUPDWLRQýIRUýDOOýVXEVFULEHUýXQLWVýRQýWKDWýORFDOLW\ïý 5HIHUýWRý6HFWLRQýéïçýIRUýPRUHýLQIRUPDWLRQï 6\VWHPñý5DGLRýðý7KLVý
LTR-NET OVERVIEW $ý¦ORFDOLW\§ýUHIHUVýWRýUHSHDWHUVýDWýWKHýVDPHýORFDð WLRQýWKDWýDUHýLQWHUFRQQHFWHGýE\ýDýFRPPRQýKLJKðVSHHGý GDWDýEXVïý8SýWRýëíýUHSHDWHUVýFDQýEHýLQWHUFRQQHFWHGñýVRý DýORFDOLW\ýFDQýLQFOXGHýXSýWRýëíýUHSHDWHUVïý$OWKRXJKý PRUHýWKDQýëíýUHSHDWHUVýFRXOGýEHýFRðORFDWHGñýWKH\ý ZRXOGýEHýFRQVLGHUHGýVHSDUDWHýORFDOLWLHVýEHFDXVHýWKH\ý DUHýQRWýLQWHUFRQQHFWHGýE\ýWKHýVDPHýGDWDýEXVïý$ýVLQJOHý GDWDýEXVýFDQýEHýXSýWRýèííýIHHWýORQJï /75ð1HWý6XEVFULEHUý8QLWV 7KHVHýVXEVFULEHUýXQLWVýDUHýGHVLJQHGýIRUýRSHUDWLRQý LQýDQý/7
LTR-NET OVERVIEW LQIRUPDWLRQýFDQýWKHQýEHýH[SRUWHGýDQGýXVHGýE\ý ELOOLQJýVRIWZDUHýWRýJHQHUDWHýFXVWRPHUýELOOLQJï 4.2.
LTR-NET OVERVIEW • • 7KHýFDOOýLVýURXWHGýWRýDýVSHFLILHGýORFDOLW\ýRQO\ýLIýDýFDOOý RQýWKHýKRPHîJURXSýKDVýEHHQýUHFHQWO\ýGHWHFWHGïý7KLVý UHVXOWVýLQýPRUHýHIILFLHQWýXVHýRIýV\VWHPýUHVRXUFHVï 4.5.
LTR-NET OVERVIEW $ýURDPLQJýVXEVFULEHUýXQLWýDOVRýPRQLWRUVýWKHý VWDWXVýUHSHDWHUýLQýWKLVýPDQQHUýZKHQýWKHýKRPHýUHSHDWHUý VLJQDOýGURSVýEHORZýWKHýWKUHVKROGýOHYHOïý+RZHYHUñýWKHý VWDWXVýUHSHDWHUýVLJQDOýOHYHOýZLOOýSUREDEO\ýDOVRýEHýEHORZý WKHýWKUHVKROGñýVRýWKHýVXEVFULEHUýXQLWýWKHQýEHJLQVý VHDUFKLQJýIRUýDýQHZýORFDOLW\ï YRLFHýRQýDQ\ýUHSHDWHUýEHFDXVHýWKHýGDWDýRFFXSLHVýWKHý VXEDXGLEOHýIUHTXHQFLHVýEHORZýWKHýYRLFHýEDQGï 4.6.
LTR-NET OVERVIEW permanently disabled by the kill command or temporarily disabled by the Sleep command. If the Kill command is sent, the unit responds indicating that it has received the message and then it permanently disables itself. It must then be brought back in for reprogramming to make it functional again. If the sleep command is sent instead, the transceiver is disabled until the Interrogate command is sent. Refer to Section 2.9.5 for more information.
LTR-NET OVERVIEW attempts are made. With mobile transceivers, this feature is always enabled, and with portable transceivers, it can be enabled or disabled by programming. ceivers, it is determined by the percentage of good data messages received over a certain period. When the home repeater signal strength drops below the threshold, the status channel of that locality is then monitored (see Section 4.6).
LTR-NET OVERVIEW 7KLVýSDJHýLQWHQWLRQDOO\ýOHIWýEODQNï April 1999 Part No.
Part No. 001-9800-600 4-99hph (First Issue) Printed in U.S.A.
