Service manual

PROGRAMMING
3-11
November 2001
Part No. 001-7240-001
3.6.9 EDIT SYSTEM SCREEN
The Edit > Systems menu parameter (see Figure
3-3) or equivalent buttons in the toolbar select the
screen that sets up and edits systems. As described in
Section 2.3.12, a system is programmed with one or
more selectable groups and other unique information.
Up to 99 systems can be programmed. Groups are
added to systems using the group edit function
described in the next section. For a system to be
selected or scanned, it must be linked to a bank
(Section 3.6.11).
The system programming functions that can be
selected by the Edit > Systems menu are as follows:
Edit > Systems > Create New - Creates a new
system. The screen that is displayed is described in
Table 3-3.
Edit > Systems > Edit Existing - Edits a current
system. The system to be edited is selected from a list.
The screen that is displayed is described in Table 3-3.
Edit > Systems > Copy Existing - Creates a
new system by copying one of the current systems.
The system to be copied is selected from a list. The
screen that is displayed is described in Table 3-3.
Edit > Systems > Delete - Deletes a system.
Edit > Systems > Test System - Currently, test
systems are not used.
3.6.10 EDIT GROUPS SCREEN
NOTE: Refer to Table 3-4 for descriptions of the Edit
Group screens.
The Edit > Groups menu parameter (see
Figure 3-3) or button in the toolbar is used to
display the screens that set up and edit the groups
assigned to each system. The following screen is
displayed to select the system in which groups are to
be added or edited. After the desired system is
selected, click the OK button and the group editing
screen in Table 3-4 is displayed. Up to 99 groups can
be assigned to each system or to any one locality.
3.6.11 EDIT BANKS SCREEN
The Edit > Banks menu parameter (see
Figure 3-3) or equivalent buttons in the toolbar are
used to select the screen that sets up and edits banks.
As described in Section 3.4.7, banks are collections of
systems that may be selected, for example, for opera-
tion in different geographical areas.
Up to sixteen banks can be programmed. System
numbering and other parameters can be different for
each bank. At least one bank must be programmed
even if bank select is not used. The functions that can
be selected by the Edit > Banks menu are as follows:
Edit > Banks > Create New - Creates a new
bank. The screen that is displayed is described in Table
3-5.
Edit > Banks > Edit Existing - Edits a current
bank. The bank to be edited is selected from a list. The
screen that is then displayed is described in Table 3-5.
Edit > Banks > Delete - Deletes a bank.
3.6.12 EDIT UNIQUE ID SCREEN
This function displays a screen that can be used to
edit the transceiver unique ID codes assigned to each
LTR-Net locality. This makes unique ID editing more
convenient than selecting each locality individually.
3.7 TRANSFER MENU
The Transfer menu which follows is used to Read
(upload) data from the transceiver to the computer and
also to Write (download) data from the computer to
the transceiver. It is also used to read error information
and version information stored in the transceiver.
More information follows: