User Manual Part 2

• Windows® 95/98/NT/2000 (3.1 cannot be used)

• Pentium® processor or equivalent

• 16 MB of RAM

• A hard disk drive with at least 3 MB of free space

• A CD-ROM drive

• An available serial port

Software Installation

Proceed as follows to install this software:

1. Close all applications that are currently running (other than Windows).

2. Insert the CD-ROM containing the PCTune software into the drive.

3. From the Windows taskbar, choose RUN and open SETUP.EXE on the drive being used.

Alternatively, use File Explorer and double click SETUP.EXE.

4. Follow the instructions on the screen. The program is automatically loaded on the hard drive

and startup shortcuts or groups are created.

Starting PCTune

Select Start in the taskbar, then Programs > PCTune > PCTune.

Exiting PCTune

Select File > Exit or click the button.

Online Help

Online help is not available.

6.1.3 PCTUNE VERSION REQUIRED

PCTune, Version 2.0.0 or later is required to tune the RF board. The version number can be

displayed by selecting the Help > About menu.

6.2 MAIN SCREEN

The main PCTune screen is shown in Figure 6-2. Information on the various parts of this screen

follows: