User Manual Part 2

56
Menu Bar - Used to select the menus described in Sections 6.3.1-6.3.5.
Tool Bar - These buttons are used to quickly select functions as follows:
- Displays the screen used to set serial port parameters (see Section 6.3.3).
- Selects the Partial Tune mode the same as the Transfer > Tune Partial menu (see Section
6.3.3) This mode allows manual selection of the desired Tune Category and then automatically
steps through the various settings for that adjustment.
- Selects the Edit Mode which allows parameters in the selected screen to be changed without
stepping through each adjustment.
- Reads and displays the current parameters programmed in the radio the same as the Radio >
Read Tune Parameters menu (see Section 6.3.3).
- Writes the current tune parameters to the radio the same as the Transfer > Write Tune
Parameters menu (see Section 6.3.3). This occurs automatically when a Partial Tune adjustment is
completed.
- Exits the current Tune Category without writing parameters to the radio.
Radio Information
When tuning parameters are read from a radio by clicking the
button or selecting the Transfer
> Read Parameters menu, the following information is displayed in the top part of the screen:
Type - The Radio Series selected by the Radio menu (see Section 6.3.2). The correct series must