User Manual Part 2

57
be selected for communication with the radio to occur.
Band - The radio frequency band of the radio displayed after information is read from radio. Do
not select the band using Tools > Set Band (Section 6.3.4) because this may make the radio
nonfunctional.
Software DSP - The first number is the version number of the radio firmware (Flash/operating
code), and the second number is the version number of the DSP software.
ESN - The Electronic Serial Number electronically stored in the radio.
Tuning Categories
These buttons select the tuning adjustment to be performed. Different functions are
displayed for the 51xx and 53xx. If the Partial tune mode is selected, these buttons select the
particular adjustment that is performed.
Mode/Tool Tip
Information on the bottom line of the screen indicates the current tune mode and information
on the selected button on other information.
6.3 MENU BAR DESCRIPTION
6.3.1 FILE MENU
Selecting File > Exit closes the PCTune program.
6.3.2 RADIO MENU
[Insert 4300 radio menu]
The Radio menu shown above selects the radio type. [Insert correct selections for 4300] The
correct radio type must be selected for communication with the radio to occur.
6.3.3 TRANSFER MENU
COM Ports - Displays the following screen which selects the serial port (1-12) and baud rate