Operating Manual

SMARTNET/SMARTZONE FEATURES
56
3. To end the call when the conversation is complete or at any other time,
press the
F3 key. Also press the F3 key to ignore an incoming call and
end it without answering.
Call Alert
The Call Alert
™
feature allows pages to be sent and received.
Proceed as follows:
Sending a Page
Pages can be placed by selecting the unit ID from a preprogrammed
list (list entry) or by directly entering it using the keypad (direct entry).
Direct entry is available with full keypad (17-key) models only.
List Entry Method
1. With a SMARTNET/SmartZone channel selected, momentarily press
the Call Alert option switch. The tag (alias) of the last ID called is
displayed if it matches an ID in your call list. Otherwise, the last ID
called is displayed.
2. Enter the index of the desired ID if you know it or scroll through the list
using the Up/Down switch until you find the desired ID. Press the
F3
key to cancel the call.
3. Press the PTT switch to send the page. The display then indicates the
alias of the radio being paged. Proceed to the bulleted list which follows
the next method for conditions that may then occur.
Direct Entry Method (Full Keypad Models Only)
1. With a SMARTNET/SmartZone channel selected, press and hold the
Call Alert option switch until a tone sounds (approximately 1 second).
The last ID called or paged is displayed.
2. Using the
0-9 keys, enter the 6-digit ID of the unit you are calling. To
erase the last digit, press the Down switch or press the
F3 key to cancel
the page.