User Manual
9
FEATURES
SECTION 1 FEATURES
Figure 1-1 Front Panel Controls
Speaker
Display
DTMF Keypad
Option Keys
Microphone
DTMF Keypad Model
Limited Keypad Model
Up/Down Sw
Menu/Option
Keys
F1 = Exit
In Various Modes:
F2 = Select/Menu
Enable
NOTE: The availability of many of the following
features is controlled by factory coding of your trans-
ceiver, installed options, and field programming. Refer
to Section 9 for more information.
1.1 GENERAL FEATURES
• The following operating modes are programmable:
– Conventional analog
– Conventional Project 25 (digital)
– Trunked Project 25 (digital)
– SMARTNET
™
/SmartZone
®
trunked (analog
or digital)
• Up to 16 zones with 16 channels each (256 channels
total) are standard. Up to 32 zones and 512 channels
total are optional.
• Large graphic display with backlight
• Up to 9 (limited keypad) or 21 (DTMF keypad)
programmable option switches
• Menu mode
• Standard and radio-wide scan modes
• Time-out timer
• User selectable high and low power output
• Keypad lock to prevent accidental key presses
• Operates on both wide and narrow band channels
• Power-up password to prevent unauthorized use
• Adjustable tone volume (with Flash code 1.9.0 or
later only)
• Soft power down (with Flash code 1.9.0 or later
only)
1.2 CONVENTIONAL FEATURES
• Up to 512 channels or talk groups programmable
• Repeater talk-around
• Carrier or Call Guard
®
controlled squelch on analog
channels, NAC and talk group IDs on P25 channels.