Operator's Manual
Table Of Contents
- SAFETY TRAINING INFORMATION
- FEATURES
- TABLE OF CONTENTS
- OPTION SWITCH FUNCTIONS
- CONTROLS AND DISPLAY
- GENERAL OPERATION
- CONVENTIONAL FEATURES
- Introduction
- Display Mode Selection
- Monitoring Before Transmitting
- Monitor Mode
- Busy Channel Lockout
- Call Guard Squelch
- Penalty Timer
- Conversation Timer
- Repeater Talk-Around
- Power Output Select
- Emergency Mode (Conventional)
- Conventional Mode Scanning
- Priority Channel Sampling
- Placing and Receiving Standard Conventional Calls
- DTMF/ANI Signaling
- Project 25 Mode Features
- Keypad Programming
- Channel Parameter Programming
- SMARTNET/SMARTZONE FEATURES
- MISCELLANEOUS
- INDEX
CONVENTIONAL FEATURES
41
and it prevents unauthorized changing of radio programming. The default
password is eight zeros, and the
F4 key must be pressed after the digits
are entered. This password is not user reprogrammable.
Keypad programming allows conventional channel parameters such
as the transmit and receive frequency and Call Guard squelch code to be
changed. In addition, several conventional mode timers can be
programmed. It cannot be used to reprogram disabled or SMARTNET/
SmartZone channels.
Menu Structure
When the Keypad Programming mode is selected by pressing the
option switch and entering the password, “
Pgm” is displayed along with
the first menu parameter “RAD PARM”. The following flowchart shows
the keypad programming mode menu structure for this radio.
51xx Portable Keypad Programming Flowchart
The information which follows describes how the various parame-
ters are programmed. When programming is complete, exit the keypad
RAD
PA RM
Clone?
Rx Freq
Tx Freq
Rx CG/NAC
Tx CG/NAC
Tx Power
TOT On-Off
*
#
Zone No.
ZONE x
F3 key
CHAN xx
#
*
#
#
#
#
#
#
#
Wide/Nar Band
#
Tx Timer
Penalty Timer
Conver. Timer
#
#
#
*
*
*
#