Operator's Manual

SMARTNET/SMARTZONE FEATURES
54
2. Enter the index of the desired telephone number if you know it or scroll
through the list using the Up/Down switch until you find the desired
number. Press the
F3 key to cancel the call.
3. Press the PTT switch to initiate the call. The display indicates “WAIT”
while the connection to the phone system is occurring. Once connected,
the normal dial tone is heard and the alias of the number being called is
displayed. The radio then automatically dials the telephone number and
the normal ringing or busy tone is heard. Proceed to the bulleted list
which follows the next method for conditions that may then occur.
Direct Entry Method (Full Keypad Models Only)
1. With a SMARTNET/SmartZone channel selected, press and hold the
Phone option switch until a tone sounds (approximately 1 second). The
display indicates the alias of the last called telephone number if it is in
your phone number list. Otherwise, the last eight digits of the last called
telephone number are displayed.
2. Enter the number using the
0-9, , and # keys. To enter a pause (indi-
cated by “P”), press and then #. To erase the last digit, press the
Down switch. The number scrolls to the left in the display so that the
eight right-most digits are always displayed. Numbers up to 16 digits
(including pauses) can be entered. Press the
F3 key to cancel the call.
3. Press the PTT switch or the
F4 key to initiate the call. The display indi-
cates “WAIT” while the connection to the phone system is occurring.
Once connected, the normal dial tone is heard and the alias of the
number being called is displayed. The radio then automatically dials the
telephone number and the normal ringing or busy tone is heard. Any of
the following conditions may then occur.
• After the called party answers, press the PTT switch to talk and
release it to listen. You cannot talk and listen at the same time because
the radio cannot transmit and receive at the same time. Each time the
PTT switch is released, a tone is heard by the other party that indicates
when a response can be made. To end the call when the conversation
is complete or at any other time, press the
F3 key.
*
*