User Manual

MISCELLANEOUS

If “PASSWORD” is briefly displayed when

power is turned on and you are prompted to enter a

password, the Power-Up Password feature is enabled.

Refer to Section 3.2 for more information.

If “UNPROGRAMD” is displayed, the cause

could be any of the following:

• An unprogrammed channel is selected. Select a

programmed channel.

• The selected channel is programmed for an option

that is not installed or an error in programming was

detected. Reprogram the radio.

If no characters appear in the display, the battery

may be discharged or defective. Try another battery. If

some other problem is occurring, turn power off and

then on again to reset the control logic. Also make

sure that the controls are properly set. If it still does

not operate correctly, return it for service.

NOTE: There are no user-serviceable components in

the transceiver. Altering internal adjustments can cause

illegal emissions, void the warranty, and result in

improper operation that can seriously damage the

transceiver.