Operating Manual Part 15
Table Of Contents
- Safety Information
- General
- Controls And Display
- General Operation
- Radio Wide Features
- Conventional Features
- 5.1 Monitoring Before Transmitting
- 5.2 Monitor Mode
- 5.3 Busy Channel Lockout
- 5.4 Call Guard Squelch
- 5.5 Penalty Timer
- 5.6 Conversation Timer
- 5.7 Repeater Talk-Around
- 5.8 Displaying Transmit / Receive Frequency
- 5.9 Emergency Alarm and Call
- 5.10 Conventional Mode Scanning
- 5.11 Standard Conventional Calls
- 5.12 DTMF / ANI Signaling
- 5.13 Project 25 Mode Features
- 5.14 Keypad Programming
- 5.15 Text Messaging
- 5.16 Sending Global Positioning System (GPS) Data
- SMARTNET / SmartZone / P25 Trunked Features
- 6.1 Analog and Digital Operation
- 6.2 Viewing Unit ID
- 6.3 Standard Group Calls
- 6.4 Private (Unit-To-Unit) Calls
- 6.5 Telephone Calls
- 6.6 Call Alert
- 6.7 Messaging
- 6.8 Sending Status Conditions
- 6.9 Emergency Alarm and Call
- 6.10 Failsoft Operation
- 6.11 SMARTNET / SmartZone / P25 Trunked Scanning Features
- 6.12 Dynamic Regrouping
- 6.13 SmartZone and P25 Trunking Unique Features
- 6.13.1 Busy Override
- 6.13.2 Site Trunking
- 6.13.3 Determining Current Site and Searching for a New Site
- 6.13.4 Locking / Unlocking a Site
- 6.13.5 Auto Site Search
- 6.13.6 ZoneFail Site Lock
- 6.13.7 P25 Wide Area Scan
- 6.13.8 Normal P25 and SmartZone Control Channel Hunt
- 6.13.9 Talkgroup Steering through System Access Permissions
- 6.13.10 P25 Wide Area Scan
- 6.14 P25 Trunking Unique Features
- Miscellaneous
- Determining Available Options
- Password Description
- Secure Communication (Encryption)
- Service Information
October 2008 5300 ES Series Mobile Radio Operating Manual 3-13
General Operation
summarizes the different displays.
Table 3.4 Control Top and Keypad Test Mode Display Messages
Action Display
Select knob turned clockwise/counterclockwise ROT CLK/ROT CNTR
Select knob pushed/released SEL 1/SEL 0
Volume knob turned VOL x, where x is the current position of the knob
from 0 – 255 (this will vary at the boundaries)
PTT button pressed/released PTT 1/PTT 0
F1 button pressed/released F1 1/F1 0
F2 button pressed/released F2 1/F2 0
F3 button pressed/released F3 1/F3 0
F4 button pressed/released F4 1/F4 0
F5 button pressed/released F5 1/F5 0
F6 button pressed/released F6 1/F6 0
“1” button pressed/released* BTN 1 1/BTN 1 0
“2” button pressed/released* BTN 2 1/BTN 2 0
“3” button pressed/released* BTN 3 1/BTN 3 0
“4” button pressed/released* BTN 4 1/BTN 4 0
“5” button pressed/released* BTN 5 1/BTN 5 0
“6” button pressed/released* BTN 6 1/BTN 6 0
“7” button pressed/released* BTN 7 1/BTN 7 0
“8” button pressed/released* BTN 8 1/BTN 8 0
“9” button pressed/released* BTN 9 1/BTN 9 0
“0” button pressed/released* BTN 0 1/BTN 0 0
“*” button pressed/released* BTN * 1/BTN * 0
“#” button pressed/released* BTN P 1/BTN P 0
Top Button 1 pressed/released* TOP 1 1/TOP 1 0
Top Button 2 pressed/released* TOP 2 1/TOP 2 0
* Only applicable if hand-held controller is attached.