Owner Manual

MAINTENANCE

Risk of electric shock! DO NOT OPEN the main panels! There are no serviceable

parts inside (except for lightbulbs).

Storage: Store heater in a clean and dry place when not in use.

Electric and Moving Parts: The fan and motors are lubricated at the factory, and will not

require lubrication for the life of the stove. Except for the lightbulbs, all electrical parts

and components are integrated into the heater, and are not serviceable by the

consumer.

Lightbulb Inspection and Replacement: The flame effect is created by two 40-watt

lightbulbs with an E-12 (small) socket base. Use only this same type of lightbulb as a

replacement. If the flame effect does not work, the bulbs may have come loose, or may

have been damaged during shipping.

Lightbulbs will become hot during use. Allow at least 10 minutes for the bulbs to cool

before touching.

To inspect or replace the bulbs, first unplug the power cord from the outlet. Locate the

access panel on the back of the stove, and remove the screws from the panel. Check

the bulbs to be sure they are tight and in working order. Replace any damaged or faulty

bulbs. Reattach the access panel when done. Do not operate this heater without the

access panel in place. Do not remove the back cover as there are no serviceable parts

inside.