Datasheet

16
DE FR ITEN
Problem Possible Cause Possible Solution
Aircraft will not respond to throttle
but other controls function
•Throttleandthrottletrimnot
lowered at aircraft initializing
•Yourtransmitterthrottle
channel might be set to the wrong
direction.
•Lowerthrottlestickandthrottle
trim to lowest settings
•OnSpektrumandJRtransmitters,
set the throttle channel servo
reversing to normal direction.
-or-
On Futaba transmitters using
DSM2 modules, set the throttle
channel servo reversing to reverse
direction.
Aircraft rudder response is
inconsistent or requires extra trim
to neutralize rudder movement
•Aileronand/orelevatorchannel
not centered
•Aircraftmovedduringinitialization
•Disconnectightbattery,center
rudder trim and re-initialize
aircraft
•Disconnectightbatteryand
re-initialize aircraft while keeping
aircraft from moving
Aircraft LED flashes and
aircraft cannot be controlled by
transmitter
•Userpoweredontransmitter
less than 5 seconds after
connecting flight battery
•Aircraftisboundtoanother
transmitter
•Transmittertoonearaircraftat
initialization or binding
•Largemetalobject(furniture,
vehicles, etc.) too near aircraft at
initialization
•Disconnectthenconnectight
battery
•Bindaircrafttoadesired
compatible transmitter
•Movetransmitteratleast2feet
(50cm) from aircraft before
connecting flight battery
•Moveawayfromlargemetal
objects and connect flight battery
Aircraft does not function and
smells burnt after connecting
flight battery
•Flightbatteryconnectedinwith
wrong polarity
•Replace5-in-1board(BLH3101).
Connect flight battery so 5-in-1
power connector boss fits in
channel in flight battery plug
Aircraft appears to show
significant decrease in flight time
•Flightbatteryisnotfullycharged
•Inadequatepowertoightbattery
charger
•Flightbattery(EFLB5001S)
damaged by over-discharge
•Fullychargeightbattery
•MakesureACpowersupply,
charger and adapter cord are
connected
•Replaceightbattery.Referto
Battery Warnings and Guidelines
Troubleshooting Guide
Optional Parts
Number Description Number Description
BLH3118R Complete Red Canopy with Grommets EFLC1005 AC to 6DC 1.5-Amp Power Supply
BLH3120R
Vertical Fin with Red Decal
EFLC1006 Celectra 1S 3.7v Variable Rate DC Li-Po
Charger
BLH1065B
Blade MLP4DSM 4CH Transmitter, 2.4GHz
FUG4 4x AA Batteries