Datasheet

4
DE FR ITEN
Blade 120 SR Features
Ready-To-Fly
Version
Bind-N-Fly
Version
Airframe – Blade 120 SR Included Included
Main and Tail Motors – Brushed 2 Installed 2 Installed
On-board Electronics – 5-in-1 receiver/servos/mixer/
ESCs/Gyro
Installed Installed
Battery – 1-cell 3.7V 500mAh Lithium Polymer (1.9Wh), 12C Included Included
Charger – DC Variable Rate Li-Po Charger with AC adapter Included Included
Transmitter – MLP4DSM 4-Channel Transmitter,
2.4GHz DSM2
Included Sold Separately
Transmitter Batteries – 4 AA Included Sold Separately
Length
12.5 in (318mm)
Height
5.0 in (127mm)
Main Rotor Diameter
12.5 in (318mm)
Weight with Battery
3.75 oz (106 g)
Blade 120 SR Specifications
First Flight Preparation
Remove and inspect contents•
Begin charging the flight battery•
Install the four AA batteries in the transmitter•
(RTF ONLY)
Install the flight battery in the helicopter (once it •
has been fully charged)
Test the controls•
Familiarize yourself with the controls•
Find a suitable area for flying•
Flying Checklist
Always turn the transmitter on first ❏
Plug the flight battery into the lead from the ❏
5-in-1 control unit
Allow the 5-in-1 control unit to initialize and ❏
arm properly
Fly the model ❏
Land the model ❏
Unplug the flight battery from the 5-in-1 ❏
control unit
Always turn the transmitter off last ❏
*Transmitter and AA Batteries not included with BNF Version