Transmitter Preset Notes

2904 Research Rd • Champaign, IL • 61822 • 800.338.4639• horizonhobby.com

Spektrum Preset Model Files

for NX Series Transmitters

IMPORTANT NOTES FOR PRESET MODEL FILES

ATTENTION: SAFETY FIRST!

The preset model files referenced here can greatly simplify setting up complex programming

in the transmitter/receiver for your favorite aircraft. Because mechanical setups can vary on some

types of models, it is your responsibility to perform all pre-flight setup and checks

recommended in the product manual to ensure all controls are operating in the proper

direction and within the manufacturer's recommended throws. You should also take time to

understand the anticipated flight characteristics for each flight mode that might be enabled (e.g.

AS3X and SAFE Select). These presets are intended for use with the stock equipment in Bind-N-

Fly® (BNF) and the recommended/stock equipment for Plug-N-Play (PNP) models. If it is listed for

an Almost-Ready-To-Fly (ARF) model, it is intended for use with the recommended equipment and

setup per that model’s manual. By clicking the links below and using any of the information and files

provided you acknowledge that pre-flight checks are solely the responsibility of the end user.

Find DX G2 Model Presets HERE - DX G2 files are compatible with NX transmitters

Find NX Model Presets HERE

PRESET MODEL FILES IMPORT INSTRUCTIONS

1. Navigate to the Spektrum File Share Drive linked to above

2. Locate a .SPM or .NSPM file for your model and Download via Right-Click or with icon

3. The file will be saved to your Downloads folder on your computer

4. Insert a name brand Class 6 32gb or smaller micro SD card into your PC

a. USB Method – Insert Micro USB into back of NX Transmitter and to PC

b. Locate USB Settings menu on NX transmitter and select Access Internal Storage

5. Copy the model file (.SPM File) to the SD card

a. USB Method – Copy file to root directory on your NX USB drive

6. Eject and remove the SD card and insert into SD card port on your NX transmitter

a. USB Method – Exit USB Settings Menu

7. Press and hold scroll wheel button while powering on transmitter to access System Setup

8. Scroll to Transfer SD Card menu and select

9. Scroll to Category, click and select Model Import/Export

10. Change SD Card field to External for SD Card or Internal if model was copied via USB

11. Scroll to Select Option, click and select Import Model

12. A list of available model files will be listed, locate and select the desired model to import

13. Select import, the new model preset will now be installed at the end of your model list

14. Make sure to confirm all controls and modes are functioning properly before use

PAGE 1
Spektrum Preset Model Files for NX Series Transmitters IMPORTANT NOTES FOR PRESET MODEL FILES ATTENTION: SAFETY FIRST! The preset model files referenced here can greatly simplify setting up complex programming in the transmitter/receiver for your favorite aircraft.
PAGE 2
Spektrum Preset Model Files for NX Series Transmitters NAVIGATING THE SPEKTRUM FILE SHARE DRIVE This drive utilizes Google’s robust file sharing platform, Google Drive. If you are not familiar with it, there are dozens of tutorials and videos that Google and third party groups have produced that should help you understand the directory system. These Files and Folders are for viewing and downloading only, you cannot upload or change any aspect of any files and you only have access to what we want you to see.