Transmitter Preset Notes

2904 Research Rd • Champaign, IL • 61822 • 800.338.4639• horizonhobby.com

Spektrum Preset Model Files

for DX Gen2 Transmitters

IMPORTANT NOTES FOR PRESET MODEL FILES

ATTENTION: SAFETY FIRST!

The preset model files referenced here can greatly simplify setting up complex

programming in the transmitter/receiver for your favorite aircraft. Because mechanical setups

can vary on some types of models, it is your responsibility to perform all pre-flight setup

and checks recommended in the product manual to ensure all controls are operating in

the proper direction and within the manufacturer's recommended throws. You should also

take time to understand the anticipated flight characteristics for each flight mode that might be

enabled (e.g. AS3X and SAFE Select). These presets are intended for use with the stock

equipment in Bind-N-Fly® (BNF) and the recommended/stock equipment for Plug-N-Play (PNP)

models. If it is listed for an Almost-Ready-To-Fly (ARF) model, it is intended for use with the

recommended equipment and setup per that model’s manual. By clicking the links below and

using any of the information and files provided you acknowledge that pre-flight checks are solely

the responsibility of the end user.

Find DX Gen2 Preset Model Files HERE

PRESET MODEL FILES IMPORT INSTRUCTIONS

1. Navigate to the Spektrum File Share Drive linked to above

2. Locate the .SPM file for your model and Download via Right-Click or with icon

3. The file will be saved to your Downloads folder on your computer

4. Insert a name brand Class 6 16gb or smaller SD card into your PC

5. Copy the model file (.SPM File) to the SD card

6. Eject and remove the SD card and insert into SD card port on your DX transmitter

7. Press and hold scroll wheel button while powering on transmitter to access System

Setup

8. Scroll to Transfer SD Card menu and select

9. Scroll to Select Option, click and select Import Model

10. A list of available model files will be listed, find and select the desired model to import

11. Select import, the new model preset will now be installed at the end of your model list

12. Make sure to confirm all controls and modes are functioning properly before use

PAGE 1
Spektrum Preset Model Files for DX Gen2 Transmitters IMPORTANT NOTES FOR PRESET MODEL FILES ATTENTION: SAFETY FIRST! The preset model files referenced here can greatly simplify setting up complex programming in the transmitter/receiver for your favorite aircraft.
PAGE 2
Spektrum Preset Model Files for DX Gen2 Transmitters NAVIGATING THE SPEKTRUM FILE SHARE DRIVE This drive utilizes Google’s robust file sharing platform, Google Drive. If you are not familiar with it, there are dozens of tutorials and videos that Google and third party groups have produced that should help you understand the directory system. These Files and Folders are for viewing and downloading only, you cannot upload or change any aspect of any files and you only have access to what we want you to see.