User Manual

EN
6
RV-7 1.1m
1.
2.
3.
4.
Control Horn and Servo Arm Settings
The table to the right shows the factory settings for the control horns and servo
arms. Fly the aircraft at factory settings before making changes.
NOTICE: If control throws are changed from the factory settings, the AR631
gain values may need to be adjusted. Refer to the Spektrum AR631 manual for
adjustment of gain values.
After flying, you may choose to adjust the linkage positions for the desired control
response. See the table to the right.
More control throw Less control throw
Elevator
Flaps
Tail wheel
Connect the Pushrods to the Control Surfaces
Horns Arms
Elevator
Elevator
Flaps
Tail wheel
Ailerons
Elevator
Flaps
Tail wheel
Rudder
Elevator
Flaps
Tail wheel
Flaps
Elevator
Flaps
Tail wheel