User Manual

M3 x 10mm

counter sunk

machine screw

M3 x 20mm

counter sunk

machine screw

Landing Gear Installation

Mount the Landing Gear to the Fuselage

1. Determine the left and right side inserts. There is a left and right indicator

marked on the inside of the insert.

2. Insert the landing gear and inserts into the slots in the fuselage and secure

using two M3 x 10mm screws for each landing gear assembly, as shown.

Wing Installation

Mount the Wing to the Fuselage

1. Align the wing with the wing saddle on the fuselage.

2. Locate the holes for the M3 x 20mm wing screws and begin to thread the

screws into place.

3. Press the wing into place, being careful to keep it aligned correctly so the

hands-free connectors fully seat.

4. Tighten the wing screws.