User Manual

Habu SS 50mm EDF

Nose Gear Installation

1. Loosen the screw (M2 x 6mm) (A) with a Phillips screwdriver, then remove the

nose gear steering arm.

2. Insert the nose gear strut (B) into the fuselage.

3. Rotate the fuselage and rest it on the landing gear. Make sure the nose gear

stays in the fuselage while rotating the aircraft.

4. Attach the steering clevis to the second hole of the nose gear arm (C).

5. Install nose gear steering arm to the support strut aligning the D-shape in the

steering arm with D-shape of the top of the strut.

6. Confirm the nose gear is straight and re-install the nose gear steering arm

and secure with the screw. If the nose gear is not straight, center the rudder/

nose gear servo and loosen the set-screw in the nose gear strut. Turn the nose

wheel to make it straight and tighten the nose gear strut set screw to

secure in place.

Disassemble in reverse order.

M2 x 6mm

Machine Screw