User Manual

Center of Gravity (CG)

Establishing the correct center of gravity (CG) is very important for a success-

ful ight experience with this aircraft. The correct CG location is identied by

the molded dimples just in front of the nger pockets on the bottom of the

aircraft. The aircraft will balance slightly nose down at this location.

This CG location has been determined with the recommended Li-Po battery

(SPMX22003S30) installed all the way forward in the battery tray.

There is built in ballast in the nose, so no additional weight is required for

proper CG.

AS3X/SAFE Control Direction Test

This test ensures that the AS3X

control system is functioning properly.

Assemble the aircraft and bind your transmitter to the receiver before

performing this test.

1. Flip transmitter switch A to SAFE mode.

CAUTION: Keep all body parts, hair and loose clothing away from a

moving propeller, as these items could become entangled.

2. Move the entire aircraft as shown and ensure the control surfaces move in

the direction indicated in the graphic. If the control surfaces do not respond

as shown, do not y the aircraft. Refer to the receiver manual for more

information.

Once the AS3X system is active, control surfaces may move rapidly. This is

normal. AS3X remains active until the battery is disconnected.

The CG is in line with

the molded dimples

at front edge of nger

pockets.

Aircraft

movement

AS3X Reaction

Pitch

Roll

For this aircraft the proper CG

will cause the aircraft to balance

slightly nose down.