User Manual

Opterra

Optional Camera Mounts

Round Nose Removal

1. Remove the 2 screws (A) from each side of the nose cone.

2. Push the tab (B) and rotate the nose down and away from the fuselage.

Camera / FPV Camera Installation

The included at nose allows you to mount various types of cameras. The in-

cluded foam inserts allow you install many types of cameras, including a GoPro

or a Spektrum FPV Camera and many others.

1. Use the included foam inserts (A) to create the correct size pocket for your

specic camera.

2. Secure the camera into the pocket with servo tape if desired.

3. If installing a FPV camera, run the wires through the fuselage to the location

of the FPV transmitter.

4. Attach the completed at nose (B) to the front of the fuselage using the

included 2 screws.

Recommended FPV equipment:

• Camera SPMVC650 or Camera with OSD SPMVC700

• VTX 600MW SPMVT600

• Antenna SPMVX5802

• Power adapter SPMA9556

• Monitor w/ Headset SPMVM430C

Mobius Camera installation.

1. Install a Mobius camera in the at area on top of the nose.

2. Secure it into place using double sided tape (C).