User Manual

Extra 300 1.3 m

Model Assembly Continued

Wing Installation

1. Remove the magnetic bottom hatch cover.

2. Slide the wing joiner into one of the wing panels.

Insert that panel into the wing opening in the

fuselage and install the other wing panel onto the

wing joiner. Make sure the aileron servo leads

from each wing are routed inside the wing saddle

and out the bottom hatch.

3. Secure the wing panels to the fuselage using four

3 x 30 mm screws.

Propeller Installation

1. Install the spinner back plate, propeller, prop washer, and

prop nut.

2. Tighten the prop nut until the propeller is installed on the

motor shaft securely.

3. Secure the spinner with the 3 x 15 mm screw.