Draco Manual

EN
DRACO 2.0m
8
Wing Installation
1. Slide the wing tube (A) into the fuselage.
2. Install the right and left wing (B and C) onto the wing tube and into the
wing pocket of the fuselage.
3. Secure the left and right wings to the fuselage using the four included nylon
locking pins (D). Turn the pin 90 degrees to lock in place.
Disassemble in reverse order.
Model Assembly Continued
A
C
B
D
Leading Edge Slat Installation
1. Carefully apply medium CA to each slat pocket. Use only one or two drops
and hold the wing to prevent CA glue from running.
2. Mount the slat onto the wing with the rounded edge facing forward. Also
ensure the slates are installed with the Horizon Hobby Logo near the wing
root.