User Manual

EN
DRACO 2.0m
8
Wing Installation
1. Slide the wing tube (A) into the fuselage.
2. Install the right and left wing (B and C) onto the wing tube and into the
wing pocket of the fuselage.
3. Secure the left and right wings to the fuselage using the four nylon locking
pins (D). Turn the pin 90 degrees to lock in place.
Disassemble in reverse order.
Model Assembly Continued
A
C
B
D
Leading Edge Slat Installation
1. Carefully apply medium CA (or another suitable adhesive) to each slat
pocket. Use only one or two drops and hold the wing to prevent the glue
from running.
2. Mount the slat onto the wing with the rounded edge facing forward. Also
ensure the slats are installed with the Horizon Hobby logo near
the wing root.
NOTICE: Never lift or carry the aircraft by the by the leading edge of the
wing or slats. Damage to the slats may occur.