User Manual

Motor Service

CAUTION: Always disconnect the ﬂ ight battery before performing

motor service.

Disassembly

1. Remove the 3mm screw holding the spinner to the prop shaft, remove the spinner.

2. Remove the nut securing the propeller, remove the propeller and prop

adapter.

3. Remove the two self tapping screws holding the cowl onto the fuselage,

remove the cowl.

4. Remove the four self tapping screws holding the motor plate to the motor

mount.

5. Remove the four 3mm machine screws holding securing the motor to the

motor plate.

Assembly

Assemble in reverse order.

• Correctly align and connect the motor wire colors with the ESC wires.

• Install the propeller with the numbers facing out from the motor.

• Tighten the prop nut and spinner screw to secure the propeller into place.

Air Tractor 1.5m

Post Flight

1. Disconnect the ﬂ ight battery from the ESC (Required for Safety and battery life).

2. Power OFF the transmitter.

3. Remove the ﬂ ight battery from the aircraft.

4. Recharge the ﬂ ight battery.

5. Repair or replace all damaged parts.

6. Store the ﬂ ight battery apart from the aircraft and monitor the battery charge.

7. Make note of the ﬂ ight conditions and ﬂ ight plan results, planning for future ﬂ ights.