User Manual

EN
Motor Service
CAUTION: Always disconnect the flight battery before performing
motor service.
Disassembly
1. Remove the 3mm screw holding the spinner to the prop shaft, remove the spinner.
2. Remove the nut securing the propeller, remove the propeller and prop
adapter.
3. Remove the two self tapping screws holding the cowl onto the fuselage,
remove the cowl.
4. Remove the four self tapping screws holding the motor plate to the motor
mount.
5. Remove the four 3mm machine screws holding securing the motor to the
motor plate.
Assembly
Assemble in reverse order.
• Correctly align and connect the motor wire colors with the ESC wires.
• Install the propeller with the numbers facing out from the motor.
• Tighten the prop nut and spinner screw to secure the propeller into place.
3.
4.
5.
3.
4.
5.
3.
4.
5.
3.
4.
5.
14
Air Tractor 1.5m
Post Flight
1. Disconnect the flight battery from the ESC (Required for Safety and battery life).
2. Power OFF the transmitter.
3. Remove the flight battery from the aircraft.
4. Recharge the flight battery.
5. Repair or replace all damaged parts.
6. Store the flight battery apart from the aircraft and monitor the battery charge.
7. Make note of the flight conditions and flight plan results, planning for future flights.