User Manual

EN
F4U-4 Corsair 1.2m BNF Basic
6
Horizontal Tail Installation
1. Slide the horizontal tail (A) into the slot in the rear of the fuselage.
Ensure the control horn faces down.
2. With a 2mm Allen driver, secure the horizontal tail piece in place
using the included M3 x 26 countersunk machine screw (B).
Use caution to avoid over-tightening the screw.
3. Attach the clevis to the elevator control horn (see instructions for
clevis connection).
A
B
Elevator
Flaps
Tail wheel
Assemble the Aircraft
Clevis Installation
1. Slide the retaining tube off the clevis body.
2. Carefully spread the clevis.
3. Insert clevis pin into control horn.
4. Slide the retaining tube into position on the clevis body.
1
2
4
3