User Manual

F4U-4 Corsair 1.2m BNF Basic

Propeller Installation

IMPORTANT: Install the propeller after all system setups are complete to

reduce the chance of accidental injury.

1. Install back side of propeller hub (A), propeller (B), and front side propeller

hub (C) onto the motor shaft (D). The propeller size numbers (10.5 x 8) must

face forward for correct propeller operation.

2. Install the spinner nut (E) to secure the propeller into place. Use a small

screw driver or hex wrench inserted into the small hole (Inset) and turn

clockwise to secure it into place.

Assemble the Aircraft

Slide the optional drop tanks (A) into the rails (B) on each wing.

Check the Center of Gravity with the drop tanks installed.

See Adjusting the Center of Gravity for more information.

Optional Drop Tank Installation