User Manual

Landing Gear Installation
Required Parts
• Fuselage
• Landing gear assembly with wheels
• 4-40 x 1/2" socket head screw (2)
• #4 washer (2)
Required Tools
• Hex wrench: 3/32"
 1. Locate the landing gear assembly. Attach the
landing gear assembly to the fuselage using
two 4-40 x 1/2" socket head screws and two
#4 washers.
Note: The landing gear will only fit one
direction for the holes to line up properly. Also,
check that the wheel will rotate freely. If not,
loosen the nuts and retighten.
10