User Manual

Aileron Hinging

Required Parts

• Wing (left and right)

• Aileron (left and right)

• CA hinges (6)

Required Tools and Adhesives

• T-pins • Thin CA

• Drill • Paper towel

• Drill bit: 1/16" (2mm)

  1. Locate the positions for the hinges. Drill a

1/16" (2mm) hole in the center of each slot of

both the wing and aileron. This creates a tunnel

for the CA, allowing the CA to penetrate into the

hinge better, bonding the hinges more securely.