User Manual

Aileron Servos and Linkages

Required Parts

• Wing panel (right and left)

• Micro control connector (2)

• 2mm x 4mm screw (2)

• Sub-Micro Servo (2)

• 3" (75mm) pushrod (2)

• Control horn and backplate (2)

• 6" (150mm) servo extension (2)

Required Tools and Adhesives

• Hobby knife • 6-minute epoxy

• String • Phillips screwdriver (small)

  1. Use 6-minute epoxy to attach the control horn

to the aileron. Make sure the horn is fully seated

in the opening.

  2. Attach a 6" servo extension to the aileron

servo. Secure the extension using string or a

commercially available clip.