User Manual

6-Pole Motor Installation

Required Parts

• Fuselage

• 2mm x 8mm sheet metal screw (3) (to secure mounts)

• 4-40 x 1/2" (12mm) socket head screw (4)

• Firewall stick mount

• 6-Pole motor

• 400 Gearbox w/56T 0.5M spur gear

• 19T 0.5 Module 3.2mm ID pinion gear

Required Tools and Adhesives

• Hex wrench: 3/32"

• Phillips screwdriver (small)

• Medium CA

• Threadlock

Note: This section covers the installation of an

inrunner motor and gearbox. Refer back to

pages 31 or 34 for outrunner installation.

 1. It may be necessary to attach pinion gears or

other accessories to your particular motor at this

time. Follow instructions included with your motor.

Note: It is very important that the gear mesh

is set correctly and is smooth with no binding.

The E-flite

™

gearbox features adjustable slotted

mounting holes to ensure your gear mesh is

correct. Remember, if the gear mesh is too loose

or too tight it may strip the gears. To extend

the life of your gearbox, we also recommend

using a small amount of grease, such as lithium

grease, on the spur gear.