User Manual

Rudder and Elevator Servos

Required Parts

• Fuselage

• Plastic rudder horn

• Pull-pull cable

• 2mm x 4mm screw (3)

• 3" (75 mm) pushrod wire

• Brass cable keepers (4)

• Micro control horn w/backplate

• Micro control connector w/retainer (3)

• Sub-micro servo (2)

• 12" (305 mm) servo extension (2)

• Micro cable adjust connector (2)

Required Tools and Adhesives

• Hobby knife

• Phillips screwdriver (small)

• Medium CA

• Thin CA

 1. Secure a 12" (305 mm) servo extension to one of

the servos. Mount the elevator servo in the aft end

of the fuselage using the hardware provided with

the servo. Secure the extension using string or a

commercially available clip.