User manual EFL-EFL2375
Available from: www.modelflight.com.au
2.
Connect the speed
control
to the
radio
system
and motor battery
.
Check that the
motor
is
rotating in
the correct
direction.
It
will
rotate
counterclockwise when viewed
from
the
front of
the
aircraft.
Use
the instructions
with your
speed
control
to correct
a
motor
that
is
operating in
the
wrong direction.
3.
T
ape
small pieces
of
cardstock to the fuselage
to
indicate
the locations
of
the
cowl mounting
tabs
at
the
front of
the fuselage.
4.
Slide the
cowling
onto the fuselage. Install the
propeller adapter
onto the
Outrunner
shaft.
Y
ou
may
need to ream out the hole
on your
prop
hub
to
fit
the
prop
adapter
shaft
at
this
point.
Slide
the
propeller
onto the
prop
adapter
shaft.
The
spinner
backplate and
spacers
may
need to be
enlarged
as
well
to
fit
the
prop
adapter
.
Slide the spinner
backplate and any
needed spacers onto the
prop
adapter
shaft.
Secure
the
propeller
using the
prop
adapter
spinner
and
be
sure
it
is secure
and tight.
17