User manual EFL-EFL2375

ManualsBrandsE-flite ManualsAircraftsMini Pulse XT

Available from: www.modelflight.com.au

2.

Locate

the

stabilizer/elevator

assembly

.

Position

the

stabilizer/elevator

assembly

so

the

control

hor

n

will

face

down, away from

the

fin.

The

threaded

rods

from

the

rudder/fin

assembly

will

slide

into

the

two

holes

in

the

stabilizer

.

3.

Slide the

rudder/stabilizer

assembly onto the

fuselage. Slide the

#4

washers onto the

threaded

rods.

Thread the

nuts

onto the

rod,

tightening

them snugly

against

the bottom

of

the fuselage.

Note

:.

The

.

tail

.

section

.

is

.

removable

.

for

.

easy

.

transporting

.

if

.

needed.

20