User manual EFL-EFL2375

Available from: www.modelflight.com.au
Note
Regar
ding
Hing
es
For your convenience and to speed the assembly process,
the hinges have already been installed and glued. W e
suggest that you take a minute before beginning assembly
of your model to check them.
Grasp the wing and aileron at each hinge location, then
gently pull on the aileron to ensure the hinges are secure
and cannot easily be pulled away from either sur face.
Use caution when gripping the wing and aileron to avoid
crushing or damaging the structure. Repeat this process
for
the elevator and rudder .
If, however , you find that the hinges pull away , simply
wick
thin CA into the hinge slots and reinstall the
hinges/sur faces.
Note on Lithium Pol ymer Batteries
Lithium Polymer batteries are significantly
more volatile than alkaline or Ni-Cd/Ni-MH
batteries used in RC applications. All
manufacturer’ s instructions and war nings
must be followed closely . Mishandling of
Li-Po batteries can result in fire. Always
follow
the manufacturer’ s instructions when
disposing
of Lithium Polymer batteries.
W arning
An RC aircraft is not a toy! If misused, it can cause
serious bodily har m and damage to proper ty . Fly
only in open areas, preferably at AMA (Academy of
Model Aeronautics) approved flying sites, following all
instructions included with your radio.
Keep loose items that can get entangled in the propeller
away from the prop, including loose clothing, or other
objects such as pencils and screwdrivers. Especially
keep
your hands away from the propeller .