User Manual

 1. Place the landing gear onto the bottom of
the fuselage. They will angle back slightly when
installed in the correct direction. Attach with
two 4-40 x 1/2" socket head bolts and two #4
black washers.
Landing Gear Installation
Required Parts
Fuselage
Main landing gear
Wheel pant (L&R)
2" (50mm) wheel (2)
4-40 x 1/2" socket head bolts (2)
#4 black washers (2)
4-40 nut (2)
4-40 locknut (2)
4-40 x 1
1
/
4
" socket head bolts (2)
#4 steel washers (4)
2mm x 6mm wood screws (2)
Required Tools and Adhesives
Hex wrench: 3/32"
Phillips screwdriver (small)
Nut driver: 1/4"
Needle-nose pliers
Note: You may consider using a larger
diameter wheel, such as 2
1
/
4
" (58mm), if
your flying site has rough terrain. By using a
larger wheel, you will not be able to use the
included wheel pants.
12