User Manual

Outrunner Motor Installation
Required Parts
Fuselage
Brushless motor
4-40 x 1
1
/
4
" socket head screw (4)
Aluminum motor spacer, 13/16" (20mm) (4)
Required Tools and Adhesives
Hex wrench: 3/32"
Screwdriver (Phillips #0)
Note: This section covers the installation of
the recommended Park 450 Outrunner motor.
The holes in the firewall for mounting the
custom X-mount will also fit the hole pattern for
our E-flite® Firewall Stick Mount (EFLM1916
– available separately) if you prefer to use a
gearbox with an inrunner motor.
 1. Attach the supplied aluminum motor X-mount
to the motor using the screws provided with the
motor. The wider section of the mount will be
positioned towards the motor wires.
14