User Manual

Tail Installation

Required Parts

Fuselage

Rudder/Fin

Stabilizer/Elevator

Servo (2)

Servo extension, 12" (305mm) (2)

Control connectors w/backplate (2)

2mm x 4mm screw (2)

4-40 locknut (2)

#4 washer (2)

Linkage wire, 4" (102mm) for elevator

Linkage wire, 5

" (140mm) for rudder

Tailwheel, 3/4"

Wheel collar (tailwheel)

Required Tools and Adhesives

Nut driver: 1/4"

Drill

Drill bit: 1/16" (1.5mm)

Screwdriver, #0 Phillips

 1. Attach the tail wheel to the tail gear wire using a

1/16" wheel collar and setscrew.