User manual EFL-EFL2425

Available from: www.modelflight.com.au
3. Slide the aileron into position. Check to make
sure it can move without inter ference at the
wing root. Remove the T -pins and apply
Thin CA to each hinge. Make sure the hinge
is fully saturated with CA. Use a paper towel
to clean up any excess CA from the wing and
aileron. Make sure to apply CA to both sides
of
the
hinge.
4. Firmly grasp the wing and aileron and gently
pull on the aileron to ensure the hinges are
secure and cannot be pulled apar t. Use caution
when gripping the wing and aileron to avoid
crushing
the
structure.
13