User manual EFL-EFL2425

Available from: www.modelflight.com.au
Ad
ditional
Required
Equipment
Ad
ditional
T
ools
and
Adhesiv
es
Recommended
JR®
Systems
Radio: JR 4-channel
Servos: JR 241 Sub-micro ser vo (JRPS241) (4)
Receiver: JR R610M 6-channel micro FM Rx (JRPR610 or
JRPR610UL)
Or purchase:
JR Quattro Lite system (JRP4487) and
(2) JR 241 Sub-micro ser vo (JRPS241)
Other Radio accessories:
Large Ar ms w/Screws (JRP A212) (2)
6" (150mm) Ser vo Extension (JRP A095) (2)
9" (230mm) Ser vo Extension (JRP A097) (2)
Batter y and Speed Contr ol Requirements
Li-Po Batter y: 11.1V 1800–2100 3-Cell (EFLB1025,
EFLB1035 or THP21003S)
Speed Control: E-Flite 20 amp brushless ESC (EFLA311) or
Castle 25 amp brushless ESC (CSEPHX25)
Motor/Gearbox/Pr opeller
6.6:1 gearbox (included) (EFLM221)
12x6 Propeller (included) (EFLP1260)
Park 400 Brushless Motor , 4200KV (EFLM1100)
Park 400 Brushless Motor , 3700KV (EFLM1105)
T
ools
Square T -pins
Hobby knife Drill
Ruler Felt-tipped pen
Hex wrench: 3/32"
Phillips screwdriver (small)
Drill bit: 3/32" (2.5mm), 1/8" (3mm)
Adhesiv es
Thin CA Medium CA
6-minute epoxy Canopy glue
Threadlock
Other
Heat gun Paper towels
W ax
paper 150–180 grit sandpaper
3