User manual EFL-EFL2425

Available from: www.modelflight.com.au
Landing
Gear
Installation
Required Par ts
Fuselage Carbon main gear
T ail skid Wheel pant (2)
1
1
/
2
" (38mm) Wheel (2) 2mm x 25mm screw (2)
2mm nut (4) #4 washer (black) (2)
4-40 x 1/2" socket screw (2) 2mm washer (4)
2mm x 6mm wood screw (2)
Required T ools and Adhesives
Threadlock 1/8" (3mm) drill bit
Drill Medium CA
Hobby knife Hex wrench: 3/32"
Phillips screwdriver (small)
1. Slide the 2mm x 25mm screw through one of
the wheels. Thread a 2mm nut onto the screw .
Slide a 2mm washer onto the screw . This will all
fit
inside
the
wheel
pant.
7