User Manual

Night Radian FT

The LED controller (A) offers the ability to change the light pattern and speed

as well as turn the lights on and off with the attached on/off switch (B).

1. Button 1 moves backward in the LED pattern list.

2. Button 2 cycles through the 7 speed settings

3. Button 3 moves forward in the LED pattern list.

4. Turn lights on or off with the attached On/Off switch.

LED Controller

SAFE

Select technology can be easily assigned to any open switch (2 or 3

position) on your transmitter. With this new feature, you now have the  exibility

to enable or disable the technology while in  ight.

IMPORTANT: Before assigning your desired switch, ensure that the travel for

that channel is set at 100% in both directions.

Assigning a switch

Bind the aircraft correctly to activate SAFE Select. This will allow the system to

be assigned to a switch.

Hold both transmitter sticks to the inside bottom corners and toggle the desired

switch 5 times (1 toggle = full up and down) to assign that switch. The

control surfaces of the aircraft will move, indicating the switch has been

selected.

Repeat the process to assign a different switch if desired.

NOTICE: SAFE Select is assignable on any unused Channels 5–9.

100%

3 position Switch

2 position Switch

Mode 1 and 2 Transmitters

x 5

123

SAFE

Select Switch Designation