User Manual

Model Assembly

Landing Gear Installation

Mount the Landing Gear to the Fuselage

1. Insert one landing gear assembly into the pocket on the side

of the fuselage as shown. The landing gear legs mount to the

aluminum block which can pivot in the pocket.

2. Thread the included 3mm x 8mm machine screws through

the landing gear leg into the threaded holes in the aluminum

pivot block.

3. Repeat the process to install the second landing gear assembly.

Mount the Spring Assemblies to the Fuselage

1. Align the spring assemblies with the mounting holes in the fuselage. These

assemblies mount to the plastic bracket pre-installed in the fuselage

between the landing gear.

2. Install the two 3 x 10mm self tapping screws to anchor the spring

assemblies in place.

Clamp the Spring Assemblies Together

1. Align the spring assemblies with the joiner bracket

2. Clamp the assembly together with the two 2x6mm self tapping screws.

3 x 10mm

self-tapping

button head

3 x 8mm

button head

machine

2 x 6mm

self-tapping

button head