User Manual

Important Information About Your Brushless ESC

Make sure your ESC brake is programmed to Off. Also,

be sure to use an ESC with the proper 9V cutoff when

using 3-cell Li-Po packs, and 12V cutoff when using 4-cell

Li-Po packs.

 3. Connect the ESC to the motor and secure it to

the inside of the fuselage using hook and loop

material. Actual ESC location may vary.

Note: It is wise to place a current meter in line

with the ESC to check for current draw during

full servo operation. Please see page 29 for

further details.

 4. Slide the propeller adapter onto the motor. Place

the propeller onto the adapter, then a spinner

cone onto the adapter and secure.

Note: It is very important that you check to be

sure the propeller is balanced before installing

onto the shaft. An unbalanced propeller will

cause performance issues.