User Manual

Radio Installation
Required Parts
• Fuselage
• Receiver
• Servo w/hardware (2)
• Pushrod connector (2)
• Clevis (2)
• 22
1
/
2
" (572mm) pushrod wire (2)
• Hook and loop material
Required Tools and Adhesives
• Screwdriver, #0 Phillips
• Drill
• Felt-tipped pen
• Drill bit: 1/16" (1.5mm), 5/64" (2mm)
• Pliers
 1. Install the rudder and elevator servos into the
fuselage using the hardware provided with the
servos. Remember to drill 1/16" (1.5mm) holes
into the servo tray for the screws.
25