User Manual

6 E-flite Shoestring 15e ARF Assembly Manual
 4. Remove the hardware from the axle. Place a
drop of light machine oil on the axle to help the
wheel roll freely.
 5. Slide the axle into the wheel.
Always use threadlock on metal-to-metal fasteners
to prevent them from vibrating loose.
 6. Use a 2.5mm hex wrench or ball driver to
secure the wheel using the shorter 4mm x 5mm
button head screw and 4mm washer removed
from the axle.
 7. Slide the wheel into the wheel pant. You may
need to flex the pant open slightly to get the
wheel to fit.
 8. Use the longer 4mm x 12mm button head screw
and 4mm washer to secure the wheel and wheel
pant to the landing gear. Use a 2.5mm hex wrench
or ball driver to tighten the screw. Use a 10mm
open-end wrench to hold the axle while tightening
the screw.
 9. Repeat Steps 4 through 8 to install the remaining
wheel and wheel pant on the landing gear.