Valiant 1.3m Manual

Float Installation (Optional)

Float Assembly

1. Install the 2 cross members (A) and the front and rear struts (B) on one

oat as shown and secure with 4 included screws (C).

2. Install the other oat onto the assembled struts as in Step 1 above.

IMPORTANT: The front strut is taller than the rear strut. (Figure 1)

Float Assembly Installation

1. With the landing gear and battery hatch removed, align and mount the

oat assembly to the bottom of the fuselage.

2. Secure the back section of the oats to the fuselage using the 2 included

brackets (A) and 4 screws (B).

3. Secure the front section of the oats using the two larger brackets (C)

and 4 screws (D).

4. Re-install the battery hatch.

Disassemble in reverse order.

Fig. 1