User Manual

3 x 16mm

Tapered hex head machine

Scale Accessories Optional

Float Installation Optional

Install the non-functional scale antennas on the top of the wing. Insert the tab into

the slot in the plastic tting and slide it toward the tail to lock the antenna in place.

Float Assembly

The water rudder is mounted on the left oat. When the two oats are arranged

correctly, the chine rails on the edges of the oats from the step to the nose

should be on the insides of the oats.

1. Install the two cross members and the front and rear oat struts between the

left and right oats as shown.

2. Secure the assembly together using eight 3mm set screws (A).

Float Installation

1. Insert the struts into the oat slots on the bottom of the fuselage.

2. Secure the front and rear struts to the fuselage using the included brackets

and eight 3 x 16mm screws screws (B).

3. Connect the oat servo lead to the rudder extension in the fuselage. Secure the

servo wire to the rear strut with tape or zip ties.

Disassemble in reverse order.

3mm

Set screw

Chine

Rails