Programming Guide

● Never use short circuit battery or motor terminals.
● Always use proper insulation material for cable insulation.
● Always use proper cable connectors.
● Do not exceed the number of cells or servos specified by the ESC.
Wrong battery polarity will damage the ESC and void the warranty.
● Install the ESC in a suitable location with adequate ventilation for cooling. This ESC
has a built-in over temperature cutoff protection feature that will immediately cut
power to the motor once the ESC temperature exceeds the 230 Deg F/ 110 Deg C
high temperature limit.
● Use only batteries that are supported by the ESC and ensure the correct polarity
before connecting.
● Switch your Transmitter ON and ensure the throttle stick is in the minimum position
before connecting the battery pack.
● Never switch your transmitter off while the battery is connected to your ESC.
● Only connect your battery pack just before flying and do not leave your battery pack
connected after flying.
● Handle your model with extreme care once the battery pack is connected and keep
away from the propeller at all times. Never stand in-line or directly in front of any
rotating parts.
● Do not immerse the ESC underwater or allow it to get wet while powered up.
● Always fly at a designated flying site and abide by the rules and guidelines set by your
flying club.
Trouble Shooting